FS-FM 1.6 dual feed rail & 450cc injectors
#1
Elite Member
Thread Starter
iTrader: (8)
Join Date: Jun 2009
Location: Albany, NY
Posts: 1,461
Total Cats: 4
FS-FM 1.6 dual feed rail & 450cc injectors
FM 1.6 dual feed rail, including 90 ells, two braided lines with fittings both ends (~12"), tee, and one braided line with one fitting and one clamp to go over 5/16" hard line (~12-18"). $125.00, including standard ship in the lower 48. RAIL SOLD
Marrin 450cc injectors (qty 4), with clips, high impedance. They don't have flow data, unfortunately. Will just include the top o-rings, not the tip to head o-rings. They only have ~5k miles. I am going to the big boys, my loss, your gain, etc. They were bolted up with the rail listed above, using the 2 black phenolic spacers.$250$225 $200.00 for the set, including standard ship in the lower 48.
I also have 4 RX-7 injectors, high impedance, 460cc. I was told that two of the four were dead, the other two were ok. You play the Russian roulette on this one, I don't know which is which. It could be a good deal if you need a couple good ones.$50$35 $25.00 for the four, including standard ship in the lower 48.
Would consider a deal for the whole package, listed above, make offer.
Shoot me a PM.
Will
Marrin 450cc injectors (qty 4), with clips, high impedance. They don't have flow data, unfortunately. Will just include the top o-rings, not the tip to head o-rings. They only have ~5k miles. I am going to the big boys, my loss, your gain, etc. They were bolted up with the rail listed above, using the 2 black phenolic spacers.
I also have 4 RX-7 injectors, high impedance, 460cc. I was told that two of the four were dead, the other two were ok. You play the Russian roulette on this one, I don't know which is which. It could be a good deal if you need a couple good ones.
Would consider a deal for the whole package, listed above, make offer.
Shoot me a PM.
Will
Last edited by webby459; 02-03-2010 at 04:42 PM. Reason: added pic
#5
Elite Member
Thread Starter
iTrader: (8)
Join Date: Jun 2009
Location: Albany, NY
Posts: 1,461
Total Cats: 4
The other set of 4 Marren injectors, 450cc, as pictured, are practically new, and I would expect them to flow out balanced.
#7
Elite Member
Thread Starter
iTrader: (8)
Join Date: Jun 2009
Location: Albany, NY
Posts: 1,461
Total Cats: 4
Bumping because I lowered the price on the injectors again. Please don't let them sit in my garage, make me an offer! I'll trade the Marrens for a set of two adjustable cam gears, or other selected internal engine goodies. PM me if you want to make a trade.
Thread
Thread Starter
Forum
Replies
Last Post