Feeler full 13b swap
#1
Feeler full 13b swap
So after much thought i really miss my 1.8l. So here it is if i can get what i want for the whole swap ill let it go. It will be a full turn key swap nothing needed.
Here is a list of the main parts as it would take too much thinking to add everything.
Subframe, engine, trans, wiring, ignition, intercooler, standalone ecu, turbo, exhaust, and walbro fuel pump.
The subframe has been brace and modded to mount the 13b.
The engine has itsb, rc650, id1000, new atl, under drive front pulley, light weight flywheel, and new clutch masters fx500 clutch.
The trans is a 84 rx7 NA trans with a miata tail housing so you can use the stock drive shaft and ppf.
The ignition system is 4 10.2mm wire and 4 msd blaster ss coils.
The microtech ecu has a map to start and run the car also comes with all the wiring needed.
The turbo is a HTA3582R with all new tial fittings.
I also have an extra motor that i was going to build.
So im looking to get $5000.00 plus what ever shipping.
I would be very interested in a trade from your motor, trans, subframe, and CASH. I can also pull your stuff and do the swap for you.
or
I will be willing to trade for a 94-95 miata plus cash the only thing is i will want to keep my wheels and suspension. As for the torsen if it has one i will include a torsen swap with my miata. This means you would also get my three gauges AEM wideband, AEM tur boost, and auto meter egt.
Here is a list of the main parts as it would take too much thinking to add everything.
Subframe, engine, trans, wiring, ignition, intercooler, standalone ecu, turbo, exhaust, and walbro fuel pump.
The subframe has been brace and modded to mount the 13b.
The engine has itsb, rc650, id1000, new atl, under drive front pulley, light weight flywheel, and new clutch masters fx500 clutch.
The trans is a 84 rx7 NA trans with a miata tail housing so you can use the stock drive shaft and ppf.
The ignition system is 4 10.2mm wire and 4 msd blaster ss coils.
The microtech ecu has a map to start and run the car also comes with all the wiring needed.
The turbo is a HTA3582R with all new tial fittings.
I also have an extra motor that i was going to build.
So im looking to get $5000.00 plus what ever shipping.
I would be very interested in a trade from your motor, trans, subframe, and CASH. I can also pull your stuff and do the swap for you.
or
I will be willing to trade for a 94-95 miata plus cash the only thing is i will want to keep my wheels and suspension. As for the torsen if it has one i will include a torsen swap with my miata. This means you would also get my three gauges AEM wideband, AEM tur boost, and auto meter egt.
#2
Also here is a link to were you can see photos and stuff i have done to the car.
https://www.miataturbo.net/media-53/my-new-90-13b-turbo-miata-51890/
https://www.miataturbo.net/media-53/my-new-90-13b-turbo-miata-51890/
Thread
Thread Starter
Forum
Replies
Last Post
bigmackloud
Miata parts for sale/trade
19
01-08-2021 12:24 PM
JesseTheNoob
DIY Turbo Discussion
15
09-30-2015 03:44 PM