When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
So I'm tired of the old engine and tranny taking up space in the shop and I've made the MZR fit so I can sell this ****.
Trackspeed built engine, all the normal stuff (8.6:1 forged H beams, etc), ST heavy doubles and 949 damper on top. Its been run to 8500 rpms for a couple years in the auto-x car, has about 10 hours on it made not enough power to break 5 speed for most of its life. Valves were reshimmed 1 auto-x season ago, probably could go for at least being checked before installing it into the car for a street car. For a racecar I would probably do a head refresh before putting it back in, the intake valves and/or seats are probably a little tired. Oil pan has a -10 AN fitting on it and 1/8" npt. VVT oil line has -3AN fitting for turbo oil feed, I can swap that out to a normal one. Comes with the coolant reroute, because ****** that thing finally sealed, its not coming off. Water pump inlet flipped and welded
Bare block price is $2000 + shipping, thats what all the parts in the motor cost. It can come with a variety of things for extra. SOLD
Speedsport carbon on carbon clutch and aluminum flywheel $200 needs rebuild
AWR 70 duro mounts $100
Geo tracker alternator already modded with wiring $60
VTCS manifold $50 SOLD
Skunk2 TB $180
FIC 900cc injectors $300
Mtuned rail $80 SOLD
Most of these parts won't be for sale individually until I sell the motor without them.
Also, the 6 speed tranny, lived like 80k miles in a 10AE street car that slowly became a street car in the last couple years, then did like half a season in the ssm car. $600 SOLD
So I'm tired of the old engine and tranny taking up space in the shop and I've made the MZR fit so I can sell this ****.
Trackspeed built engine, all the normal stuff (8.6:1 forged H beams, etc), ST heavy doubles and 949 damper on top. Its been run to 8500 rpms for a couple years in the auto-x car, has about 10 hours on it made not enough power to break 5 speed for most of its life. Valves were reshimmed 1 auto-x season ago, probably could go for at least being checked before installing it into the car for a street car. For a racecar I would probably do a head refresh before putting it back in, the intake valves and/or seats are probably a little tired. Oil pan has a -10 AN fitting on it and 1/8" npt. VVT oil line has -3AN fitting for turbo oil feed, I can swap that out to a normal one. Comes with the coolant reroute, because ****** that thing finally sealed, its not coming off. Water pump inlet flipped and welded
Bare block price is $2000 + shipping, thats what all the parts in the motor cost. It can come with a variety of things for extra.
Speedsport carbon on carbon clutch and aluminum flywheel $600
AWR 70 duro mounts $100
Geo tracker alternator already modded with wiring $60
VTCS manifold $50
Skunk2 TB $180
Also, the 6 speed tranny, lived like 80k miles in a 10AE street car that slowly became a street car in the last couple years, then did like half a season in the ssm car. $600
I am willing to ship to Canada, PM me your postal code.
I will get shipping quotes to all that are waiting tomorrow. I will also be listing my old EFR with a nicked turbine wheel and my old turbo setup tomorrow when I can take pics.
Also pulled the engine and tranny apart tonight to sell it tomorrow morning. I totally forgot that the last race last year I kept having to adjust the clutch rod after each run to make the clutch disengage, and it was making a funny noise under the car.
Speedsport clutch now $200, needs rebuild.
Also remembered that I fat fingered the fuel injectors last spring before I ran the car for the whole season They got smooshed a little and I had to clean them up with a file, seal fine, shouldnt effect the atomization.
Do do you know where rebuild parts are available ? I was under the impression that SpeedSport no longer existed . I do know Goodwin no longer sells this clutch. Fred B
Originally Posted by Leafy
I am willing to ship to Canada, PM me your postal code.
I will get shipping quotes to all that are waiting tomorrow. I will also be listing my old EFR with a nicked turbine wheel and my old turbo setup tomorrow when I can take pics.
Also pulled the engine and tranny apart tonight to sell it tomorrow morning. I totally forgot that the last race last year I kept having to adjust the clutch rod after each run to make the clutch disengage, and it was making a funny noise under the car.
Speedsport clutch now $200, needs rebuild.