Big All BNIB Part Out - FM DIY Kit, 949 6UL, FIC 650CC, Enthuza 3"
#1
Big All BNIB Part Out - FM DIY Kit, 949 6UL, FIC 650CC, Enthuza 3"
Hey guys. Unfortunately I've got to put my turbo project on hold for another year. Need the cash as startup capital.
Located in Livermore CA. Can meet in Livermore at VL Motorsports, Antioch CA, or Berkeley CA.
So here's the stuff. All of the turbo parts are complete brand spankin' new. No use on them what so ever. They have never been used! Most of the stuff has never been out of it's packaging. Some of it has been opened to be fondled, namely the turbo, but nothing has been mounted/seen dirt/grime. Keep that in mind with prices.
Please give me a day to go up to the shop to take photos of all the parts.
I will be going out to Miatas and Mazda Raceway with VL Motorsports. I am open to people picking up the parts there, but I will require a deposit so that I'm not holding parts for people only for them to flake out (ask me how I know).
Up first, the DIY FM Kit.
94-97 No Electronics Kit
Here's the options:
NA No Electronics Kit
GT2560R Turbocharger
Stage 8 Hardware and Inconel Studs ($89)
2 1/16" Boost Gauge
Single Gauge Pod
Silicone Water Supply Lines
High Temperature Rubber Oil Drain
Tool Bag for Turbo Install
Airbox For Turbo Kit
Turbo Heat Shield
As spec'd this kit was $3200. So considering the stuff is literally all brand new in box, I'm going to be asking $2900. I think it's fair, because it's cheaper than the whole kit spec'd from FM even before shipping. Would really like to keep this local pick up.
Fuel Injector Clinic 650CC Injectors With Plug and Play Adapters (650cc FIC Mazda Miata Fuel Injector Clinic Injector Set (High-Z)
Item# IS601-0650H , Plug & Play Option 4cyl: Plug & Play Adaptor)
These were $390 Shipped. Asking $355 shipped with paypal F&F, or 3%, Google Wallet, Squarecash. SOLD
Enthuza Turbo Racer 3" for NA Chassis
This is the 3" turbo racer, all stainless steel. Great looking piece, I'm sad I can't use it to be honest.
Paid $572, selling for $500.Local pick up only please, unless you'd like to pay extra for shipping.
Also have an Enthuza 2.5" to 3" (FM Downpipe to 3" exhaust) test pipe which can go for an extra $20 with the exhaust, or $50 on it's own.
949 Racing 6UL Silver 15x8
Very little wear on these. No curbing whatsoever, just some stubborn (non-corrosive!) brake dust. With some wheel cleaner I have no doubt that you could get them spotless.
$500 SOLD
If you've got any questions, please feel free to PM me! Happy turbocharging.
Fuel Injectors
Located in Livermore CA. Can meet in Livermore at VL Motorsports, Antioch CA, or Berkeley CA.
So here's the stuff. All of the turbo parts are complete brand spankin' new. No use on them what so ever. They have never been used! Most of the stuff has never been out of it's packaging. Some of it has been opened to be fondled, namely the turbo, but nothing has been mounted/seen dirt/grime. Keep that in mind with prices.
Please give me a day to go up to the shop to take photos of all the parts.
I will be going out to Miatas and Mazda Raceway with VL Motorsports. I am open to people picking up the parts there, but I will require a deposit so that I'm not holding parts for people only for them to flake out (ask me how I know).
Up first, the DIY FM Kit.
94-97 No Electronics Kit
Here's the options:
NA No Electronics Kit
GT2560R Turbocharger
Stage 8 Hardware and Inconel Studs ($89)
2 1/16" Boost Gauge
Single Gauge Pod
Silicone Water Supply Lines
High Temperature Rubber Oil Drain
Tool Bag for Turbo Install
Airbox For Turbo Kit
Turbo Heat Shield
As spec'd this kit was $3200. So considering the stuff is literally all brand new in box, I'm going to be asking $2900. I think it's fair, because it's cheaper than the whole kit spec'd from FM even before shipping. Would really like to keep this local pick up.
Fuel Injector Clinic 650CC Injectors With Plug and Play Adapters (650cc FIC Mazda Miata Fuel Injector Clinic Injector Set (High-Z)
Item# IS601-0650H , Plug & Play Option 4cyl: Plug & Play Adaptor)
These were $390 Shipped. Asking $355 shipped with paypal F&F, or 3%, Google Wallet, Squarecash. SOLD
Enthuza Turbo Racer 3" for NA Chassis
This is the 3" turbo racer, all stainless steel. Great looking piece, I'm sad I can't use it to be honest.
Paid $572, selling for $500.Local pick up only please, unless you'd like to pay extra for shipping.
Also have an Enthuza 2.5" to 3" (FM Downpipe to 3" exhaust) test pipe which can go for an extra $20 with the exhaust, or $50 on it's own.
949 Racing 6UL Silver 15x8
Very little wear on these. No curbing whatsoever, just some stubborn (non-corrosive!) brake dust. With some wheel cleaner I have no doubt that you could get them spotless.
$500 SOLD
If you've got any questions, please feel free to PM me! Happy turbocharging.
Fuel Injectors
Last edited by astral; 09-28-2016 at 11:32 PM.