BEGI S4 Turbo Kit for Sale with Extras - Trades for Race Parts Welcome - More Pics
#1
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Was originally going a different route, but looking to go N.A. NASA PTE so the turbo kit is time to go:
BEGI Stainless Steel S4 Tubular Manifold with EGR Bung
Manifold Brace
BEGI Stainless Steel 2.75" Downpipe
Garrett GT2560R turbo. No shaft play, has a TINY chip in the corner of one of the exhaust blades. About 3/32nds of an inch. Have been told by Corky and others its meaningless in terms of power or relablity. Have had zero problems in either regard.
BEGI FMIC #2 with IC pipes
BEGI heat shields above the turbo and beside
BEGI airbox with turbo line block
Recirc BOV valve and piping.
SS oil and water lines
Boost gauge
No MSPNP or WB included.
Hardware included - it is non inconel stock BEGI stuff, but I have not had any backing out problems.
$1,500 for the above, would like to sell whole. (pending sale)
Extras for extra charge:
-RX7 550cc injectors. Cleaned, tested and blueprinted by Witchhunter. $100 (sale pending)
Comes from a car with about 4,000 miles on them.
Ill take better and more pics in the next couple days.
Trades I am looking for +/- cash:
Weld in NASA/SCCA legal Cage
Hardtop
NA 1.8L Fuel Rail and injectors
Header and midpipe
Fire Supression System
Race nets
Fresh sets of race pads
Other race goodies
New 205 NT01s
Everything in LA area so local pickup or trade makes sense for us both but will ship if needed. Not paying to ship a hardtop etc though.
BEGI Stainless Steel S4 Tubular Manifold with EGR Bung
Manifold Brace
BEGI Stainless Steel 2.75" Downpipe
Garrett GT2560R turbo. No shaft play, has a TINY chip in the corner of one of the exhaust blades. About 3/32nds of an inch. Have been told by Corky and others its meaningless in terms of power or relablity. Have had zero problems in either regard.
BEGI FMIC #2 with IC pipes
BEGI heat shields above the turbo and beside
BEGI airbox with turbo line block
Recirc BOV valve and piping.
SS oil and water lines
Boost gauge
No MSPNP or WB included.
Hardware included - it is non inconel stock BEGI stuff, but I have not had any backing out problems.
$1,500 for the above, would like to sell whole. (pending sale)
Extras for extra charge:
-RX7 550cc injectors. Cleaned, tested and blueprinted by Witchhunter. $100 (sale pending)
Comes from a car with about 4,000 miles on them.
Ill take better and more pics in the next couple days.
Trades I am looking for +/- cash:
Weld in NASA/SCCA legal Cage
Hardtop
NA 1.8L Fuel Rail and injectors
Header and midpipe
Fire Supression System
Race nets
Fresh sets of race pads
Other race goodies
New 205 NT01s
Everything in LA area so local pickup or trade makes sense for us both but will ship if needed. Not paying to ship a hardtop etc though.
Last edited by Mr. Wob; 12-17-2012 at 12:55 AM.
#10
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
It was on a 95. Kit is pending sale with 1 in line after. Injectors are pending sale with 1 in line after.
I have a ton of other stock Miata parts though if they are useful. Will update this thread when both sell, happy to answer questions and put you in line for either above too.
I have a ton of other stock Miata parts though if they are useful. Will update this thread when both sell, happy to answer questions and put you in line for either above too.
#11
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
If you don't sell this, I would go for the the BEGi airbox. And the nifty manifold. I know you are selling as a whole kit, but my BEGi manifold is older and I do not have a heat shielded air box.
Thread
Thread Starter
Forum
Replies
Last Post
StratoBlue1109
Miata parts for sale/trade
21
09-30-2018 01:09 PM
kronikker
Miata parts for sale/trade
17
10-06-2015 10:18 PM