90-93 Intercooler Throttle Body Pipe for Sale
#1
Thread Starter
Junior Member
iTrader: (8)
Joined: Jun 2005
Posts: 428
Total Cats: 0
From: Lansdale, PA
90-93 Intercooler Throttle Body Pipe for Sale
I have 9 throttle body pipes for a custom intercooler setup. These pipes are mild steel, tig welded and bead rolled. These pipes will have to be painted or powercoated before installation.
These pipes were designed to work with a stock 90-93 Greddy intercooler setup. These pipes would also be a great start to a custom 90-93 intercooler kit.
$60.00 shipped within US.
These pipes were designed to work with a stock 90-93 Greddy intercooler setup. These pipes would also be a great start to a custom 90-93 intercooler kit.
$60.00 shipped within US.
Last edited by Stripes; 07-10-2008 at 01:46 PM.
#2
What makes these not compatible with the 1.8TB? I thought they were pretty much the same. There are 2 bungs on these. One I know is for the IAC, what is the size/purpose of the one on the other side? Is it a 1" bung for easy install of a BOV?
It's a good price for a nice piece.
It's a good price for a nice piece.
#3
Thread Starter
Junior Member
iTrader: (8)
Joined: Jun 2005
Posts: 428
Total Cats: 0
From: Lansdale, PA
The 1.6 compared to the 1.8 throttle body is a little different. You cannot run 1.8 intercooler pipe straight down from the TB without modifying a sensor or removing the ac fan. My 1.6 TB is designed to run straight down from the TB.
Yes you are correct, there is a 3/4 adapter with a machined lip for the IAC, and on the other side is a 1 inch nipple for a BOV. I found most people were using BOVs with roughly a 1 inch nipple attachment.
Yes you are correct, there is a 3/4 adapter with a machined lip for the IAC, and on the other side is a 1 inch nipple for a BOV. I found most people were using BOVs with roughly a 1 inch nipple attachment.
What makes these not compatible with the 1.8TB? I thought they were pretty much the same. There are 2 bungs on these. One I know is for the IAC, what is the size/purpose of the one on the other side? Is it a 1" bung for easy install of a BOV?
It's a good price for a nice piece.
It's a good price for a nice piece.
#7
Thread Starter
Junior Member
iTrader: (8)
Joined: Jun 2005
Posts: 428
Total Cats: 0
From: Lansdale, PA
Sorry, but I have to bump my own thread. I still have 8 of these suckers left. I'll try to move these pipes on Ebay soon. These pipes would be a great start for a DIY Intercooler setup.
I can prep and paint these pipes at the buyers request.
Also, thanks Olderguy for buying two intakes pipes
I can prep and paint these pipes at the buyers request.
Also, thanks Olderguy for buying two intakes pipes
#9
What size is the lower portion. Not the TB side.
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote
#13
i want it if no one has dibs on it already!
#15
Hey John,
Sent you a pm just want to make sure you still have one left for me so i can send you some cash
Sent you a pm just want to make sure you still have one left for me so i can send you some cash
#17
If u have any left I'll take one! Pm me payment info
Thread
Thread Starter
Forum
Replies
Last Post
stoves
Suspension, Brakes, Drivetrain
5
04-21-2016 03:00 PM