When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Looking to make a bunch of hp on the cheap? Good news! I've got a set of OEM Mazda GTR rods and pistons I wont be using. Basically as strong as it gets for OEM rods for the BP, and the fancy squeeze-cast pistons that will take more abuse as well, but without the piston slap! There's Famila people making 400hp on this setup, so it should be more than enough for most Miatas. Over a grand new when you could still get the pistons, and the rods themselves are north of $550 if you can find a set.
$450 (+3% for PayPal) shipped in the lower 48.
$400 (+3% for PayPal) shipped in the lower 48.
Last edited by mrryanbaker; 06-02-2017 at 06:10 PM.
Looking to make a bunch of hp on the cheap? Good news! I've got a set of OEM Mazda GTR rods and pistons I wont be using. Basically as strong as it gets for OEM rods for the BP, and the fancy squeeze-cast pistons that will take more abuse as well, but without the piston slap! There's Famila people making 400hp on this setup, so it should be more than enough for most Miatas. Over a grand new when you could still get the pistons, and the rods themselves are north of $550 if you can find a set.
I know the rods are fine, but will these pistons work alright with a 1.6 assuming no over bore? Pardon my ignorance
They will not, sadly. Stock bore on a B6 is 78mm, and you can't really go big enough on a 1.6 to use these pistons. Rods would work just fine, as you said.