1.8 swapped & supercharged miata partout
#1
Junior Member
Thread Starter
iTrader: (1)
Join Date: Feb 2015
Location: Farmington Hills, MI
Posts: 137
Total Cats: 16
1.8 swapped & supercharged miata partout
Update with parts sold & prices. More pictures here:
https://photos.app.goo.gl/4PWGDr8bxKXuNtb79
Alright kiddos, its partout time!
Here's a list of most of the parts. I'd like to sell some of it in groups (like the supercharger setup), so those will be listed w/ prices at the bottom. If there's anything I've accidentally left out of that group, let me know & we can talk.
Chassis:
'92 miata
Energy Suspension Poly bushings
Mazda r package tie rod ends
Bauer extended lower ball joints
1.8 miata brakes w/ PFC pads
Kosei K8R wheels with decent tread Star Spec IIs (rare tire, no longer available!! I know what I have)
Extra set of NB wheels included
Zero rust. The car’s originally from CO, I keep it stored in an airplane hangar (no salt) in the winter
Body / Interior:
1 cut & vented hood, I also have the original unmodified hood
Modified hood has headlight covers riveted to it & Aerocatch latches. I have un-smoothed fiberglass headlight covers I was making to bond to the hood
Popups are removed & hella lights are in the old turn signal area, but the popup assemblies are still completely functional & included
R pakage front lip
Unknown spoiler
2 OMP Champ-R seats
2 OMP 6point harnesses
PCI seatbrackets (slightly modified to mount OMP seats - I did discuss the modifications w/ PCI)
Stock belts are still in the car, OE seats included as well
Drivetrain:
Custom straightpipe to stock cat-back
MP62 Supercharger
Dual throttle body setup
Additional smaller supercharger nose pulley (62.5)
CX Racing Intercooler (for a v mount rx-7)
CX Racing Radiator
Upgraded supercharger pulleys
Coolant reroute
Oil cooler and sandwich plate
Header heatshield made from Inconel pulled off a wrecked racecar exhaust
I feel like I'm forgetting a bunch of stuff, just send me a message if you're looking for something else
Thanks!
The car is located in SE Michigan
Ignore my fat fingers making appearances in the photos
All prices are OBO, not including shipping,
https://photos.app.goo.gl/4PWGDr8bxKXuNtb79
Alright kiddos, its partout time!
Here's a list of most of the parts. I'd like to sell some of it in groups (like the supercharger setup), so those will be listed w/ prices at the bottom. If there's anything I've accidentally left out of that group, let me know & we can talk.
Chassis:
'92 miata
Energy Suspension Poly bushings
Mazda r package tie rod ends
Bauer extended lower ball joints
1.8 miata brakes w/ PFC pads
Kosei K8R wheels with decent tread Star Spec IIs (rare tire, no longer available!! I know what I have)
Extra set of NB wheels included
Zero rust. The car’s originally from CO, I keep it stored in an airplane hangar (no salt) in the winter
Body / Interior:
1 cut & vented hood, I also have the original unmodified hood
Modified hood has headlight covers riveted to it & Aerocatch latches. I have un-smoothed fiberglass headlight covers I was making to bond to the hood
Popups are removed & hella lights are in the old turn signal area, but the popup assemblies are still completely functional & included
R pakage front lip
Unknown spoiler
2 OMP Champ-R seats
2 OMP 6point harnesses
PCI seatbrackets (slightly modified to mount OMP seats - I did discuss the modifications w/ PCI)
Stock belts are still in the car, OE seats included as well
Drivetrain:
Custom straightpipe to stock cat-back
MP62 Supercharger
Dual throttle body setup
Additional smaller supercharger nose pulley (62.5)
CX Racing Intercooler (for a v mount rx-7)
CX Racing Radiator
Upgraded supercharger pulleys
Coolant reroute
Oil cooler and sandwich plate
Header heatshield made from Inconel pulled off a wrecked racecar exhaust
Supercharger setup (MP62 supercharger, all mounting brackets & supports [including the unused parts in my setup], upgraded idler & tension pulleys, dual throttle-body setup, smaller nose pulley). I'm open to not selling the intercooler with the setup, let me know what you want$3000without the intercooler, $3500 with
- Passenger & driver OMP Chanmp R seats, OMP 6-point harnesses (still within cert), and the modified PCI seat brackets
- $850per assembly
1.8 '99 engine w/ Flyin Miata clutch & flywheel, poly mounts, and coolant reroute$1250Add $300 for the IDs, I'll sell them separate for $350
5 speed trans$300
Eibach swaybars, mounts, & rod-end adjustable end-links$250
Flyin Miata springs, Bilstein HDs, and ISC extended tophats$650
1.8 brakes with Super Miata SS lines$200
- 4.1 torsen swap (
driveshaft, diff, and axles)$800$600
MS3X & Pigtails$600
- NB-NA8 connection pipe
- 1.8 swapped people. Do keyboard warriors on the forum tell you that you can't use the NB2 header (chuck that NB1 garbage) with a NA catback? Well I've got the perfect part for you to rub it in their face (modified straightpipe to connect the two)
$100$75
Steering hub adapter and momo Mod 30$275
Rollbar$500 (local greatly preferred)
- Manual steering rack, poly mounts, R package tie rod ends, and standard ITRs (~5k mi on joints)
$450$400
I feel like I'm forgetting a bunch of stuff, just send me a message if you're looking for something else
Thanks!
The car is located in SE Michigan
Ignore my fat fingers making appearances in the photos
All prices are OBO, not including shipping,
Last edited by rollie; 06-20-2020 at 06:45 AM. Reason: Update with parts sold, reduced prices, and more pictures