1.8 Brake Caliper Brackets, ABS sensor, pump module. Plus random stuff!
#1
Senior Member
Thread Starter
iTrader: (9)
Join Date: Oct 2006
Location: Lexington SC
Posts: 1,176
Total Cats: 35
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
I have a complete set of 1.8 caliper brackets for sale out of a 96 M-edition for $85 obo. I do have the rotors and pads that are almost brand new as well but don't really want to ship them since they weigh so much and can be had for cheap at NAPA.
96 M-Edition Miata Brake Caliper Brackets Upgrade your 1.6 Brakes
ABS sensors, pump and module for $65 obo. If you need any other brake parts let me know and I will see what I can do.
96 Miata M-Edition ABS Sensors Pump and Controller
I have to get this 96 donor miata out of my garage for the winter so I can start reworking my 91. I took the engine, tranny and rear end out to swap into my 91 and am selling pretty much anything I can get some money for unless I can keep it as an eventual spare for my other two miatas.
If you need any rocker panels replaced or other areas of frame or body, let me know and I can cut sections out based on your instructions.
Almost full interior left, minus seats and door panels.
I also have a almost 100% new tan vinyl top with glass window as well $100.
I will be stripping the car to a bare frame before taking it to a junk yard so if there is any oddball part you need let me know. I will accept pretty much any offer. If I don't sell it its just going to get crushed!
If I have to ship I will charge whatever the USPS flat rate boxes cost. Max $10-15 unless its real heavy or large.
96 M-Edition Miata Brake Caliper Brackets Upgrade your 1.6 Brakes
ABS sensors, pump and module for $65 obo. If you need any other brake parts let me know and I will see what I can do.
96 Miata M-Edition ABS Sensors Pump and Controller
I have to get this 96 donor miata out of my garage for the winter so I can start reworking my 91. I took the engine, tranny and rear end out to swap into my 91 and am selling pretty much anything I can get some money for unless I can keep it as an eventual spare for my other two miatas.
If you need any rocker panels replaced or other areas of frame or body, let me know and I can cut sections out based on your instructions.
Almost full interior left, minus seats and door panels.
I also have a almost 100% new tan vinyl top with glass window as well $100.
I will be stripping the car to a bare frame before taking it to a junk yard so if there is any oddball part you need let me know. I will accept pretty much any offer. If I don't sell it its just going to get crushed!
If I have to ship I will charge whatever the USPS flat rate boxes cost. Max $10-15 unless its real heavy or large.
Last edited by Rallas; 10-04-2009 at 08:56 PM.
#4
Senior Member
Thread Starter
iTrader: (9)
Join Date: Oct 2006
Location: Lexington SC
Posts: 1,176
Total Cats: 35
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Here are some more parts for sale. Several parts from a 1990 Shortnose Crank 1.6L Miata.
If you don't like the price, make an offer. This stuff has to go.
Intake $20
Throttle Body $20
Oil Pan $50
Oil Pickup $10
Valve Cover $30
Exhaust Manifold and heatshied $35
Coil Pack $50
Dipstick tube and dipstick $10
Fuel Rail $15
1.6 injectors $20
OEM Radio $5
Waterpump Inlet $5
AC and PS brackets $5
Timing belt covers all 3 pieces $20
Flywheel $25
1.6 shortnose Crank Pully/ Balancer $40
Almost brand new vinyl top with zipout glass window $100 obo, I have more pictures if you need them.
1.6 Head with cams, I have the cam gears for the head as well.$200
Check out pictures at
http://columbia.craigslist.org/pts/1406541578.html
Some pictures http://www.cardomain.com/ride/3391667
96 M-ed parts
All 4 Calipers, parking brake levers are not frozen on rears --$150
Both Airbags and module-Not sure what they are worth yet. PM me with an offer
Heater/AC Controls
Factory/Dealership Alarm Module$20
Passenger Electric Mirror
interior carpeting $30
seatbelt brace bar $30 -Prefer local pickup but will ship if there is interest.
Cruise Controll actuator and computer + any other parts you might need $50
PM me and I will email better pictures of individual parts.
If you don't like the price, make an offer. This stuff has to go.
Intake $20
Throttle Body $20
Oil Pan $50
Oil Pickup $10
Valve Cover $30
Exhaust Manifold and heatshied $35
Coil Pack $50
Dipstick tube and dipstick $10
Fuel Rail $15
1.6 injectors $20
OEM Radio $5
Waterpump Inlet $5
AC and PS brackets $5
Timing belt covers all 3 pieces $20
Flywheel $25
1.6 shortnose Crank Pully/ Balancer $40
Almost brand new vinyl top with zipout glass window $100 obo, I have more pictures if you need them.
1.6 Head with cams, I have the cam gears for the head as well.$200
Check out pictures at
http://columbia.craigslist.org/pts/1406541578.html
Some pictures http://www.cardomain.com/ride/3391667
96 M-ed parts
All 4 Calipers, parking brake levers are not frozen on rears --$150
Both Airbags and module-Not sure what they are worth yet. PM me with an offer
Heater/AC Controls
Factory/Dealership Alarm Module$20
Passenger Electric Mirror
interior carpeting $30
seatbelt brace bar $30 -Prefer local pickup but will ship if there is interest.
Cruise Controll actuator and computer + any other parts you might need $50
PM me and I will email better pictures of individual parts.
Last edited by Rallas; 10-15-2009 at 08:00 AM. Reason: Added parts to sell
#14
Senior Member
Thread Starter
iTrader: (9)
Join Date: Oct 2006
Location: Lexington SC
Posts: 1,176
Total Cats: 35
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
I still have them. I they are still in the car so it would take me a day or two to get them out.
How does $30 plus shipping sound. It should fit in the $10 flat rate box, so no more than that.
You should be able to PM even if you don't have too many posts. I never had a problem, i just know you need at least 20 posts to post in the classified sections.
How does $30 plus shipping sound. It should fit in the $10 flat rate box, so no more than that.
You should be able to PM even if you don't have too many posts. I never had a problem, i just know you need at least 20 posts to post in the classified sections.
#16
Senior Member
Thread Starter
iTrader: (9)
Join Date: Oct 2006
Location: Lexington SC
Posts: 1,176
Total Cats: 35
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
I havn't found the heater core hoses yet, but I am pretty sure they are far from ideal. You are probably better off getting ones from autozone or napa to be honest, they are only like $15. Ill let you know if I do find them.
Last edited by Rallas; 10-06-2009 at 04:32 PM.
#18
Senior Member
Thread Starter
iTrader: (9)
Join Date: Oct 2006
Location: Lexington SC
Posts: 1,176
Total Cats: 35
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Tan dash out of 96 M-edition Miata, really good shape for $50, glove box for $15 or $60 for both.
Chrome M-edition sill plates $30
I would prefer to sell the dash locally or anywhere within the states of SC, NC, or GA.
See pics at
96 Mazda Miata M-edition Tan Dash and Chrome Sill plates
Chrome M-edition sill plates $30
I would prefer to sell the dash locally or anywhere within the states of SC, NC, or GA.
See pics at
96 Mazda Miata M-edition Tan Dash and Chrome Sill plates