TPS Scale??
#2
Boost Pope
iTrader: (8)
Join Date: Sep 2005
Location: Chicago. (The less-murder part.)
Posts: 33,339
Total Cats: 6,793
Most tables (VE, Spark, AFR) do not use TPS. They are scaled to MAP on the Y axis and RPM on the X axis. Unless you are running in Alpha-N mode as opposed to Speed Density (MAP-based) then these are the only two variables you need.
The only places where TPS is commonly used is in the Accel/Decel and Accel wizard screens (for TPS-based accel), in the OverRun screen (for minimum cutoff threshold) and in the various Boost Targets tables when EBC is used.
The only places where TPS is commonly used is in the Accel/Decel and Accel wizard screens (for TPS-based accel), in the OverRun screen (for minimum cutoff threshold) and in the various Boost Targets tables when EBC is used.
#3
hm, but when i insert any tps then i see the scale go up and down, otherwise it stays at 0, maybe the hole table have 0 on the X-Axis..
But this can be a missload from your msq?
Maybe there are some erros when i load it on my European Standart Configuration.
Btw.. i use now HighRes latest Version.
But this can be a missload from your msq?
Maybe there are some erros when i load it on my European Standart Configuration.
Btw.. i use now HighRes latest Version.
#4
Boost Czar
iTrader: (62)
Join Date: May 2005
Location: Chantilly, VA
Posts: 79,688
Total Cats: 4,113
# Connect to your MSP with MegaTune, from the Tools menu, choose 'Calibrate TPS'.
# With your foot OFF the throttle, click 'GET CURRENT' for the Closed Throttle ADC Count
# Floor it and hold it there. Click 'GET CURRENT' for the Full Throttle ADC Count
# With your foot OFF the throttle, click 'GET CURRENT' for the Closed Throttle ADC Count
# Floor it and hold it there. Click 'GET CURRENT' for the Full Throttle ADC Count
Thread
Thread Starter
Forum
Replies
Last Post
mikeflys1
Miata parts for sale/trade
15
10-27-2018 02:19 PM