RX7 Injectors
#11
Supporting Vendor
iTrader: (33)
Join Date: Jul 2006
Location: atlanta-ish
Posts: 12,659
Total Cats: 134
I've seen big color variances from set to set. Some look purple, some look red, some are in between. All share the same part #.
-2020 is the turbo 550s
-2010 is the non turbo 460s
Either will work for most applications
-2020 is the turbo 550s
-2010 is the non turbo 460s
Either will work for most applications
#12
Boost Czar
iTrader: (62)
Join Date: May 2005
Location: Chantilly, VA
Posts: 79,688
Total Cats: 4,113
the clips are what the injectors plug into...the one I posted on the right is the Mazda connector, on the left...the square connector...you can buy the connectors for them for about $5 each and cut the existing ones and solder those in.
#13
the clip is what plugs onto the oblique part at the top. The male end is part of the injector. They are shaped differently between the 2 injectors in that pic. The pluug and play ones are oval (right) the ones that you would need to put new clips on the injector harness are square (left). Both "work" you just need to replace the clips for the square ones. You can get injector clip kits on ebay fror like $15 shipped which is way better than you'll find on any e-tailer.
#15
Supporting Vendor
iTrader: (33)
Join Date: Jul 2006
Location: atlanta-ish
Posts: 12,659
Total Cats: 134
Not on the website last I looked, but they do offer them. I think they include them with the FMII Link & Hydra kits