Ran fine, No rpm signal MS3x
#1
![Exclamation](https://www.miataturbo.net/images/icons/icon4.gif)
I am having issue with Megasquirt getting RPM signal. I had the car running a week ago when I came back out to mess with the car I am getting crank but no start. I am very new with MS3 and electronics in general. I am seeing in many areas about adjusting the pots. I had originally had it running on 7.5 turns clockwise. I have tried reflashing the firmware. I had forgotten to unplug the ignitor so I am not sure if I killed it or not. Im kind of at a loss as to what could have changed. Maybe bad CAS?
1990 1.6
640FF injectors
MS3x - following trubokitty build
I have attached a composite log, a datalog when the car was running, and the tune it was running on (running rich).
I am getting nothing on the tooth logger.
I may get a JimStim to test the board.
If there is any more information that will help diagnose, please let me know.
1990 1.6
640FF injectors
MS3x - following trubokitty build
I have attached a composite log, a datalog when the car was running, and the tune it was running on (running rich).
I am getting nothing on the tooth logger.
I may get a JimStim to test the board.
If there is any more information that will help diagnose, please let me know.
Thread
Thread Starter
Forum
Replies
Last Post
Saldua
MEGAsquirt
16
06-26-2023 07:55 PM
MrMaddoxP
MEGAsquirt
0
05-22-2022 02:00 PM