No start after driving.
#1
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
94', MSPNP2.
So here's another issue.
Went for a drive after trying to adjust the idle settings and now the car won't start at all. Doesn't even try to catch. I'm at a complete loss on this one, so any help would be greatly appreciated.
Here's my datalog and tune as well.
So here's another issue.
Went for a drive after trying to adjust the idle settings and now the car won't start at all. Doesn't even try to catch. I'm at a complete loss on this one, so any help would be greatly appreciated.
Here's my datalog and tune as well.
#2
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Bump, and an update.
It's not the next morning, and the coolant and air temp are both below 60F, and it's doing the same thing. Refusing to start.
I'm getting a new error code on my MTX-L that says E9 during cranking, but it shouldn't have power during cranking anyway since it's connected to the ignition wire.
It's not the next morning, and the coolant and air temp are both below 60F, and it's doing the same thing. Refusing to start.
I'm getting a new error code on my MTX-L that says E9 during cranking, but it shouldn't have power during cranking anyway since it's connected to the ignition wire.
#4
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
I just tested for spark and I'm getting nothing to all 4 cylinders. Does the MS override fuel injection even if the CAS is going out? Since I'm getting fuel, but absolutely no spark.
Thread
Thread Starter
Forum
Replies
Last Post