Newbie Needs Help with DIYPNP
#1
Newbie Needs Help with DIYPNP
Here's my story:
93 Miata, with 1.8 conversion, Built & Installed a DIYPNP, ran beautiful...(I drove it around the block twice before pulling engine)
Installed new engine (specs below), and struggled to get it running.
When i did have it running I attempted to set the timing with the "trigger wizard" in TunerStudio.
With fixed timing at 10deg....my timing light was indicating it was running at 55deg advance!!??....attempts to sync vis tigger wizard only made the car run worse/almost die.
after fumbling thru TS settings I somehow screwed up and didnt save my "tune" that was "working" and now doesnt run at all unless fed starting fluid
can someone please look at my data/etc and point me in right direction?
possibly make a startup map for my combo?
James
cant seem to post Data Logs and Current Tune says invalid file??
MegaSquirt DIYPNP N76 kit
Sequential injection mod
Variable TPS mod
AFM/MAF delete
Engine Combo
99-00 "bp-4w" head w/ oversize valves
Exh/Int cam swap
96-98 1.8l intake manifold
11:1 compression (supertech pistons)
carillo rods
stock crankshaft
lightened flywheel
93 Miata, with 1.8 conversion, Built & Installed a DIYPNP, ran beautiful...(I drove it around the block twice before pulling engine)
Installed new engine (specs below), and struggled to get it running.
When i did have it running I attempted to set the timing with the "trigger wizard" in TunerStudio.
With fixed timing at 10deg....my timing light was indicating it was running at 55deg advance!!??....attempts to sync vis tigger wizard only made the car run worse/almost die.
after fumbling thru TS settings I somehow screwed up and didnt save my "tune" that was "working" and now doesnt run at all unless fed starting fluid
can someone please look at my data/etc and point me in right direction?
possibly make a startup map for my combo?
James
cant seem to post Data Logs and Current Tune says invalid file??
MegaSquirt DIYPNP N76 kit
Sequential injection mod
Variable TPS mod
AFM/MAF delete
Engine Combo
99-00 "bp-4w" head w/ oversize valves
Exh/Int cam swap
96-98 1.8l intake manifold
11:1 compression (supertech pistons)
carillo rods
stock crankshaft
lightened flywheel
#4
Brainieack.....im a noob, misssed the joke. im sure it was funny tho
Ben- THANK_YOU!! ok changed fuel reqirement
(noobie mistake occured from switching tunes without tinking MY BAD)
NOW--- still wont start and run... tries to fire off sometimes, fires right off with starting fluid... updated tune and data log attached
again big thanks in advance to all who help
james
Ben- THANK_YOU!! ok changed fuel reqirement
(noobie mistake occured from switching tunes without tinking MY BAD)
NOW--- still wont start and run... tries to fire off sometimes, fires right off with starting fluid... updated tune and data log attached
again big thanks in advance to all who help
james
#8
Supporting Vendor
iTrader: (33)
Join Date: Jul 2006
Location: atlanta-ish
Posts: 12,659
Total Cats: 134
You don't have coolant or air temp values in your datalog.
Was this running before an engine swap, then after it doesn't run? If that's the case, I suspect that maybe you missed hooking something up.
Was this running before an engine swap, then after it doesn't run? If that's the case, I suspect that maybe you missed hooking something up.
Thread
Thread Starter
Forum
Replies
Last Post
Mikel
MEGAsquirt
4
09-28-2015 04:46 PM