NB idle control in Tunerstudio
#1
NB idle control in Tunerstudio
I understand the NB idle controller needs to be set to 500Hz.
In Tunerstudio under PWM idle settings I believe I need to set the valve frequency as 30.5 x (this frequency).
I'd imagine to get it close to 500Hz that number would have to be 16?
The maximum Tunerstudio allows me to set is 8?
Should I be able to set this higher? The setting I originally had in there was 12, but when I changed it to 16 it automatically flipped to 8 and I haven't been able to set it back.
What do I need to do to stop the valve humming?
This is using the latest version of Tunerstudio on a DIYPNP.
In Tunerstudio under PWM idle settings I believe I need to set the valve frequency as 30.5 x (this frequency).
I'd imagine to get it close to 500Hz that number would have to be 16?
The maximum Tunerstudio allows me to set is 8?
Should I be able to set this higher? The setting I originally had in there was 12, but when I changed it to 16 it automatically flipped to 8 and I haven't been able to set it back.
What do I need to do to stop the valve humming?
This is using the latest version of Tunerstudio on a DIYPNP.
#2
A PWM multiplier Board is one way.
https://www.miataturbo.net/megasquirt-18/99-diypnp-1-5-build-comments-questions-48516/ (4th point in first post)
But I have botherered to tune my idle that well (needs some throttle while cold), it's not my DD and I have no AC or PS to care about.
https://www.miataturbo.net/megasquirt-18/99-diypnp-1-5-build-comments-questions-48516/ (4th point in first post)
But I have botherered to tune my idle that well (needs some throttle while cold), it's not my DD and I have no AC or PS to care about.
Thread
Thread Starter
Forum
Replies
Last Post
Zaphod
MEGAsquirt
47
10-26-2018 11:00 PM
StratoBlue1109
Miata parts for sale/trade
21
09-30-2018 01:09 PM