Is my car's ECU fried?
#1
Elite Member
Thread Starter
iTrader: (22)
Join Date: Dec 2006
Location: Sunny Spanish speaking Non US Caribbean
Posts: 3,224
Total Cats: 3
Is my car's ECU fried?
I'm starting to get a grip of what happened with my MS install. I went back to the shop this morning, retraced our steps and this was the info we analyzed:
When we first installed the MS, it would only turn on 1 red light out of the 3 but the car fired up but could not keep idling. After trying to start it a few times, Cristian (he is the tuner), at my suggestion, opened the Easytherm file and somehow we flashed the 29v file to the MS eprom. We think this info then passed on the car's ECU and this is were we started having problems.
The way I see it I now have an MS in perfect working order and an ailing ECU.
I need some assistance from Matt Cramer or Foundsoul in the spirit of Christmas
We already went out locally to see if we could find an ECU for my car. I already checked FM's website and they have used ones for sale but I would rather not buy it. Cristian is going to take my car's ECU to a friend of his to see if they can reflash it.
More info for Matt and Foundsoul:we already checked the car's coils and CAS and there is nothing wrong with them but when we check the voltage we only get a pulse from the fuel pump (which by the way we changed to a Walbro 190lph after the "event") but get no pulse at the sparkplugs or the Fuel injectors.
Please help.
Rafa
When we first installed the MS, it would only turn on 1 red light out of the 3 but the car fired up but could not keep idling. After trying to start it a few times, Cristian (he is the tuner), at my suggestion, opened the Easytherm file and somehow we flashed the 29v file to the MS eprom. We think this info then passed on the car's ECU and this is were we started having problems.
The way I see it I now have an MS in perfect working order and an ailing ECU.
I need some assistance from Matt Cramer or Foundsoul in the spirit of Christmas
We already went out locally to see if we could find an ECU for my car. I already checked FM's website and they have used ones for sale but I would rather not buy it. Cristian is going to take my car's ECU to a friend of his to see if they can reflash it.
More info for Matt and Foundsoul:we already checked the car's coils and CAS and there is nothing wrong with them but when we check the voltage we only get a pulse from the fuel pump (which by the way we changed to a Walbro 190lph after the "event") but get no pulse at the sparkplugs or the Fuel injectors.
Please help.
Rafa
#2
Boost Pope
iTrader: (8)
Join Date: Sep 2005
Location: Chicago. (The less-murder part.)
Posts: 33,478
Total Cats: 6,897
Wait- are you asking whether during the process of flashing new firmware into your MS you might have accidentally corrupted the firmware in the ECU? Absolutely no way that's possible.
(yes, only two days into my vacation and I'm already breaking my internet embargo)
(yes, only two days into my vacation and I'm already breaking my internet embargo)
#3
Elite Member
Thread Starter
iTrader: (22)
Join Date: Dec 2006
Location: Sunny Spanish speaking Non US Caribbean
Posts: 3,224
Total Cats: 3
Let me ask this: since my MS is working and I'm now facing issues with the car's ECU; how complicated would it be to use the MS as Standalone even if I have to sacrifice the use of the A/C? Any input?
#4
I too am breaking my internet embargo while on vacation.
Sorry for the late response. Your stock ECU should be fine, there is no way you messed up the actual firmware on the ECU while flashing MS.
You won't be able to use that MS as standalone though. It doesn't have the idle mod or the fan mod completed so you won't be able to idle the car and your fans will never turn on unless you wire them on all the time.
I know the MS is good, i started and drove my own car on it for a period of time before it shipped out. So that option can be ruled out.
There are only so many things it can be. You said only one red light of three came on when starting the car. The two outer LEDs are for ignition and the middle one is for warmup. So when the car is warming up the center one will be lit. The outer two will be constantly lit when you turn the key on.
Try this for me rafa. Leave the MS connected, unplug your coils, then turn the MS on and tell us if both of the outer LEDs are on or off.
I was troubleshooting someone elses MS and one of their ignition circuits was messed up. When i would turn the key on with the coils connected D14 (LED closest to DB9) would lag behind D16 by about a second, then it would light up. When starting the car the car would run on two cylinders because the D14 circuit wasn't firing the coil.
When i disconnected my coils and turned the key on both LEDs lit up at exactly the same time.
If you have a coil that is hay wire or now two coils that are haywire maybe the LEDs will show some sign of that. You say even the stock ECU won't run the car anymore. That tells me that something else is wrong and i'm 90% sure it shouldn't be your stock ECU. Megasquirt should still start the car i believe with no stock ECU plugged in, it just won't control the idle valve, so it won't idle very well and your fans won't kick on when it reaches temp.
Sorry for the late response. Your stock ECU should be fine, there is no way you messed up the actual firmware on the ECU while flashing MS.
You won't be able to use that MS as standalone though. It doesn't have the idle mod or the fan mod completed so you won't be able to idle the car and your fans will never turn on unless you wire them on all the time.
I know the MS is good, i started and drove my own car on it for a period of time before it shipped out. So that option can be ruled out.
There are only so many things it can be. You said only one red light of three came on when starting the car. The two outer LEDs are for ignition and the middle one is for warmup. So when the car is warming up the center one will be lit. The outer two will be constantly lit when you turn the key on.
Try this for me rafa. Leave the MS connected, unplug your coils, then turn the MS on and tell us if both of the outer LEDs are on or off.
I was troubleshooting someone elses MS and one of their ignition circuits was messed up. When i would turn the key on with the coils connected D14 (LED closest to DB9) would lag behind D16 by about a second, then it would light up. When starting the car the car would run on two cylinders because the D14 circuit wasn't firing the coil.
When i disconnected my coils and turned the key on both LEDs lit up at exactly the same time.
If you have a coil that is hay wire or now two coils that are haywire maybe the LEDs will show some sign of that. You say even the stock ECU won't run the car anymore. That tells me that something else is wrong and i'm 90% sure it shouldn't be your stock ECU. Megasquirt should still start the car i believe with no stock ECU plugged in, it just won't control the idle valve, so it won't idle very well and your fans won't kick on when it reaches temp.
#5
Elite Member
Thread Starter
iTrader: (22)
Join Date: Dec 2006
Location: Sunny Spanish speaking Non US Caribbean
Posts: 3,224
Total Cats: 3
I too am breaking my internet embargo while on vacation.
Sorry for the late response. Your stock ECU should be fine, there is no way you messed up the actual firmware on the ECU while flashing MS.
You won't be able to use that MS as standalone though. It doesn't have the idle mod or the fan mod completed so you won't be able to idle the car and your fans will never turn on unless you wire them on all the time.
I know the MS is good, i started and drove my own car on it for a period of time before it shipped out. So that option can be ruled out.
There are only so many things it can be. You said only one red light of three came on when starting the car. The two outer LEDs are for ignition and the middle one is for warmup. So when the car is warming up the center one will be lit. The outer two will be constantly lit when you turn the key on.
Try this for me rafa. Leave the MS connected, unplug your coils, then turn the MS on and tell us if both of the outer LEDs are on or off.
I was troubleshooting someone elses MS and one of their ignition circuits was messed up. When i would turn the key on with the coils connected D14 (LED closest to DB9) would lag behind D16 by about a second, then it would light up. When starting the car the car would run on two cylinders because the D14 circuit wasn't firing the coil.
When i disconnected my coils and turned the key on both LEDs lit up at exactly the same time.
If you have a coil that is hay wire or now two coils that are haywire maybe the LEDs will show some sign of that. You say even the stock ECU won't run the car anymore. That tells me that something else is wrong and i'm 90% sure it shouldn't be your stock ECU. Megasquirt should still start the car i believe with no stock ECU plugged in, it just won't control the idle valve, so it won't idle very well and your fans won't kick on when it reaches temp.
Sorry for the late response. Your stock ECU should be fine, there is no way you messed up the actual firmware on the ECU while flashing MS.
You won't be able to use that MS as standalone though. It doesn't have the idle mod or the fan mod completed so you won't be able to idle the car and your fans will never turn on unless you wire them on all the time.
I know the MS is good, i started and drove my own car on it for a period of time before it shipped out. So that option can be ruled out.
There are only so many things it can be. You said only one red light of three came on when starting the car. The two outer LEDs are for ignition and the middle one is for warmup. So when the car is warming up the center one will be lit. The outer two will be constantly lit when you turn the key on.
Try this for me rafa. Leave the MS connected, unplug your coils, then turn the MS on and tell us if both of the outer LEDs are on or off.
I was troubleshooting someone elses MS and one of their ignition circuits was messed up. When i would turn the key on with the coils connected D14 (LED closest to DB9) would lag behind D16 by about a second, then it would light up. When starting the car the car would run on two cylinders because the D14 circuit wasn't firing the coil.
When i disconnected my coils and turned the key on both LEDs lit up at exactly the same time.
If you have a coil that is hay wire or now two coils that are haywire maybe the LEDs will show some sign of that. You say even the stock ECU won't run the car anymore. That tells me that something else is wrong and i'm 90% sure it shouldn't be your stock ECU. Megasquirt should still start the car i believe with no stock ECU plugged in, it just won't control the idle valve, so it won't idle very well and your fans won't kick on when it reaches temp.
For clarification purposes; you say if I connect the MS with no stock ECU plugged in the car should fire up? If so, I'd like to try that.
BTW. I'm also thinking about another thing. Could this be a grounding issue? Remember, I said they had to lift the car's engine again to take out the oil pan and put it back in because it was leaking. If it's a grounding issue; what should I look for?
I'm very sorry.
Rafa
p.s. I'll take my camera with me. Any specific pics?
#6
There are a few grounding places on the engine.
The stock ECU grounds on the intake manifold, that is part of the wiring harness for the injectors and all that. It's one big bundle.
There is a braided strap that goes from the block to the chassis on the driver side near the firewall. It is also very important.
There is another grounding place on the PPF, which is the brace that holds the transmission and diffrential together. The battery grounds on the PPF.
Then inside the trunk there should be a grounding point right near the batter on the chassis. Clean and verify all of those connections. There might be a few more i don't know about as well. Grounding is one of the most important things with MS.
The stock ECU grounds on the intake manifold, that is part of the wiring harness for the injectors and all that. It's one big bundle.
There is a braided strap that goes from the block to the chassis on the driver side near the firewall. It is also very important.
There is another grounding place on the PPF, which is the brace that holds the transmission and diffrential together. The battery grounds on the PPF.
Then inside the trunk there should be a grounding point right near the batter on the chassis. Clean and verify all of those connections. There might be a few more i don't know about as well. Grounding is one of the most important things with MS.
#7
Elite Member
Thread Starter
iTrader: (22)
Join Date: Dec 2006
Location: Sunny Spanish speaking Non US Caribbean
Posts: 3,224
Total Cats: 3
There are a few grounding places on the engine.
The stock ECU grounds on the intake manifold, that is part of the wiring harness for the injectors and all that. It's one big bundle.
There is a braided strap that goes from the block to the chassis on the driver side near the firewall. It is also very important.
There is another grounding place on the PPF, which is the brace that holds the transmission and diffrential together. The battery grounds on the PPF.
Then inside the trunk there should be a grounding point right near the batter on the chassis. Clean and verify all of those connections. There might be a few more i don't know about as well. Grounding is one of the most important things with MS.
The stock ECU grounds on the intake manifold, that is part of the wiring harness for the injectors and all that. It's one big bundle.
There is a braided strap that goes from the block to the chassis on the driver side near the firewall. It is also very important.
There is another grounding place on the PPF, which is the brace that holds the transmission and diffrential together. The battery grounds on the PPF.
Then inside the trunk there should be a grounding point right near the batter on the chassis. Clean and verify all of those connections. There might be a few more i don't know about as well. Grounding is one of the most important things with MS.
Thanks
#8
Elite Member
Thread Starter
iTrader: (22)
Join Date: Dec 2006
Location: Sunny Spanish speaking Non US Caribbean
Posts: 3,224
Total Cats: 3
This being Christmas day I don't expect any suggestions but I figured I presented some readings for tomorrow on.
We got a tester and went down to check different engine connections. At the plug going into the coils it read: 10.1 K-ohms; which, according to the "Automotive Repair Manual for 1990 thru 1997 models" we're using as a reference is within the 8.7 to 12.9 k-ohms it gives as parameters. We figure the coils are the ones that are fried. (the orange plug on the first attached pics) btw, no I did not have anything to drink last night!
We also took a visual look at the Crank Angle Sensor following WOT's suggestion in an email. It sure looks dirty and somewhat crooked. I thought it was not as upright as it should be but; what do I know? (second pic attached).
I guess we'll start on lazzer's COP install first thing tomorrow morning. I already called a friend with a background in electronics and his own soldering iron and we'll get on with that.
Any other suggestions welcome
Rafa
We got a tester and went down to check different engine connections. At the plug going into the coils it read: 10.1 K-ohms; which, according to the "Automotive Repair Manual for 1990 thru 1997 models" we're using as a reference is within the 8.7 to 12.9 k-ohms it gives as parameters. We figure the coils are the ones that are fried. (the orange plug on the first attached pics) btw, no I did not have anything to drink last night!
We also took a visual look at the Crank Angle Sensor following WOT's suggestion in an email. It sure looks dirty and somewhat crooked. I thought it was not as upright as it should be but; what do I know? (second pic attached).
I guess we'll start on lazzer's COP install first thing tomorrow morning. I already called a friend with a background in electronics and his own soldering iron and we'll get on with that.
Any other suggestions welcome
Rafa
#16
Elite Member
Thread Starter
iTrader: (22)
Join Date: Dec 2006
Location: Sunny Spanish speaking Non US Caribbean
Posts: 3,224
Total Cats: 3
To all previous posters my most sincere thanks. I'll follow the spray advice. I've spent all day with the car testing different connections with a tester (actually more like looking how my youngest son did it!:gay.
I took lots of pics. The way I see this, Chad is absolutely right, my issue is most probably related to the coils. Following Chad's suggestion, I completely disconnected the car's ECU and tried to fire up the car connected only to the MS. He had already told me that the car would not idle. The car just did not fire up. There's no way in hell that both computers are bad. I'm going to follow my son's most recent advice and take the engineer's approach to this matter; complete one change, test and move on the next one. Since I've already bought the Toyota coil on plugs, I'm going to follow lazzer's advice and put them on first.
To Paul, I do appreciate your offer.
Thanks for taking the time to answer and enjoy Christmas dinner. As I stated before, ours was last night. I'm still way too full!.
Rafa
I took lots of pics. The way I see this, Chad is absolutely right, my issue is most probably related to the coils. Following Chad's suggestion, I completely disconnected the car's ECU and tried to fire up the car connected only to the MS. He had already told me that the car would not idle. The car just did not fire up. There's no way in hell that both computers are bad. I'm going to follow my son's most recent advice and take the engineer's approach to this matter; complete one change, test and move on the next one. Since I've already bought the Toyota coil on plugs, I'm going to follow lazzer's advice and put them on first.
To Paul, I do appreciate your offer.
Thanks for taking the time to answer and enjoy Christmas dinner. As I stated before, ours was last night. I'm still way too full!.
Rafa
#17
Elite Member
Thread Starter
iTrader: (22)
Join Date: Dec 2006
Location: Sunny Spanish speaking Non US Caribbean
Posts: 3,224
Total Cats: 3
Where are you located? Can you give me till tomorrow? If I do need it I can paypal the funds to you but first I would have to check with UPS about shipping charges. In my case that's not fun (ask Chad, he knows
Next time I'm only writing G when I answer you:gay: (I love that smilie, hahaha)
**** guys I already owe too many of you for assisting. (I guess I love this one too)
Rafa
#18
lol rafa.... as long as you have good references (which i bet you do) i'm willing to help out another brother in need
the original sig was suppose to be XxGoKoUxX but it was all messed up so i stuck with xXxGoKoUxX (i couldn't post on MT.net)
box+wrap=10$ at most shipped back at me via USPS
the original sig was suppose to be XxGoKoUxX but it was all messed up so i stuck with xXxGoKoUxX (i couldn't post on MT.net)
box+wrap=10$ at most shipped back at me via USPS
#19
Elite Member
Thread Starter
iTrader: (22)
Join Date: Dec 2006
Location: Sunny Spanish speaking Non US Caribbean
Posts: 3,224
Total Cats: 3
lol rafa.... as long as you have good references (which i bet you do) i'm willing to help out another brother in need
the original sig was suppose to be XxGoKoUxX but it was all messed up so i stuck with xXxGoKoUxX (i couldn't post on MT.net)
box+wrap=10$ at most shipped back at me via USPS
the original sig was suppose to be XxGoKoUxX but it was all messed up so i stuck with xXxGoKoUxX (i couldn't post on MT.net)
box+wrap=10$ at most shipped back at me via USPS
Sunny Caribbean for me :gay: Chad was really surprised when it came time to ship the MS. Maybe next time I have to buy a big part I'll just pay the plane ticket. jaja.
BTW, I feel your pain with the sig. Phillip decided that my sig could not be Rafa so I'm stuck with Spaniard. Oh well!
Rafa