MSpnp2 with AEM 30-0352
05-03-2024, 10:11 AM
#1
Newb
Thread Starter
Join Date: Apr 2024
Posts: 1
Total Cats: 0
MSpnp2 with AEM 30-0352
99 miata with bp4w running kraken gt2560r.
Im installing an MSpnp2 and AEM X-Series Trueboostx gauge kit. I have not really found any good instructions on wiring this into the MS. Not being familiar with CAN bus I am thinking of just installing the boost controller and connecting it to the MS options port on port 7. Then running the gauge as just a regular boost gauge without the boost control solenoid connected to it. Is there any benefit to running it via CAN and if anyone has posted which I have not found via the search function please link the instructions?
AEM 30-0352 pinout
Pin Color Description
1 RED Switched 12V Power (5A Fuse)
2 BLACK Power Ground
3 GREEN/BLACK AEMnet- / CANL (Optional)
4 WHITE/BLACK AEMnet+ / CANH (Optional)
5 ORANGE Scramble Boost (Optional)
6 - 8 - Not Used
9 BLACK Boost Solenoid Output Negative
10 GRAY Alarm Lowside Output
Im installing an MSpnp2 and AEM X-Series Trueboostx gauge kit. I have not really found any good instructions on wiring this into the MS. Not being familiar with CAN bus I am thinking of just installing the boost controller and connecting it to the MS options port on port 7. Then running the gauge as just a regular boost gauge without the boost control solenoid connected to it. Is there any benefit to running it via CAN and if anyone has posted which I have not found via the search function please link the instructions?
AEM 30-0352 pinout
Pin Color Description
1 RED Switched 12V Power (5A Fuse)
2 BLACK Power Ground
3 GREEN/BLACK AEMnet- / CANL (Optional)
4 WHITE/BLACK AEMnet+ / CANH (Optional)
5 ORANGE Scramble Boost (Optional)
6 - 8 - Not Used
9 BLACK Boost Solenoid Output Negative
10 GRAY Alarm Lowside Output
Reply
0
0
Thread
Thread Starter
Forum
Replies
Last Post
