Mspnp2
#1
Junior Member
Thread Starter
Join Date: Jul 2016
Location: pembroke pines, florida
Posts: 128
Total Cats: -59
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Hey guys i just purshased a megasquirt pnp2 for my 97 mazda miata and i uploaded the base map on it. I m having troubles when startig up the car it wont start unless i step on the gas and it wont idle until i rev it a couple of secs, and when i try to accelerate as soon as i press the rpm drops for a sec and then goes up! I m not sure if it is because of the base map or is there any good map out there. I have a t25/t28 turbo target goal is 10 psi and i will be installing rx8 fuel injectos the yellow ones.
If anyone already has a good map i would greatly appreciate it
If anyone already has a good map i would greatly appreciate it
#5
Junior Member
Thread Starter
Join Date: Jul 2016
Location: pembroke pines, florida
Posts: 128
Total Cats: -59
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
If i had time i would ve read the megamanual and wont post for help just asking for a simple favor to tell me how the numbers should be i m pretty sure a lot of people had this issue i just want to know how they solved it
#7
Elite Member
![](/mt2011/images_td/ranks/supporter1.gif)
iTrader: (5)
Join Date: Oct 2011
Location: Detroit (the part with no rules or laws)
Posts: 5,683
Total Cats: 805
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Have you even set required fuel, calibrated timing, tps, I assume you're on speed density, have you wired in IAT, ran line to MAP sensor?
What HAVE you done?
I admire the fact that you're trying to use the right tool, but you first need to learn how to actually use it.
Please don't even think of driving this car before getting it to idle better than stock. Only then drive it but wire the wastegate open until you learn how to tune, or use VEAL.
What HAVE you done?
I admire the fact that you're trying to use the right tool, but you first need to learn how to actually use it.
Please don't even think of driving this car before getting it to idle better than stock. Only then drive it but wire the wastegate open until you learn how to tune, or use VEAL.
#8
Junior Member
Thread Starter
Join Date: Jul 2016
Location: pembroke pines, florida
Posts: 128
Total Cats: -59
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Have you even set required fuel, calibrated timing, tps, I assume you're on speed density, have you wired in IAT, ran line to MAP sensor?
What HAVE you done?
I admire the fact that you're trying to use the right tool, but you first need to learn how to actually use it.
Please don't even think of driving this car before getting it to idle better than stock. Only then drive it but wire the wastegate open until you learn how to tune, or use VEAL.
What HAVE you done?
I admire the fact that you're trying to use the right tool, but you first need to learn how to actually use it.
Please don't even think of driving this car before getting it to idle better than stock. Only then drive it but wire the wastegate open until you learn how to tune, or use VEAL.
i dont want to mess up the numbers thats why i m asking for help to c what the numbers should look like. For the idle
it drives better then stock but idling is a lil weird
#9
Elite Member
![](/mt2011/images_td/ranks/supporter1.gif)
iTrader: (5)
Join Date: Oct 2011
Location: Detroit (the part with no rules or laws)
Posts: 5,683
Total Cats: 805
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
I m having troubles when startig up the car it wont start unless i step on the gas and it wont idle until i rev it a couple of secs, and when i try to accelerate as soon as i press the rpm drops for a sec and then goes up
Verify required fuel for the 254cc injectors.
Shitcan the MAF, wire in a GM IAT.
Tune your cranking and priming pulse.
Tune your idle.
At least post this tune for us to look at.
#20
Elite Member
![](/mt2011/images_td/ranks/supporter1.gif)
iTrader: (5)
Join Date: Oct 2011
Location: Detroit (the part with no rules or laws)
Posts: 5,683
Total Cats: 805
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
After looking at the tune:
I do not like repeating myself.
Have you even looked at idle settings? I don't tune in open loop, i use closed loop.
Your fuel map is seriously cringe worthy. You shouldn't be driving this thing with the wastegate arm attached whatsoever.
This thing has to drive like ****.
I do not like repeating myself.
Verify required fuel for the 254cc injectors.
Shitcan the MAF, wire in a GM IAT. (unless you did since the tune is set for speed density)
Tune your cranking and priming pulse.
Tune your idle.
At least post this tune for us to look at.
Shitcan the MAF, wire in a GM IAT. (unless you did since the tune is set for speed density)
Tune your cranking and priming pulse.
Tune your idle.
At least post this tune for us to look at.
Your fuel map is seriously cringe worthy. You shouldn't be driving this thing with the wastegate arm attached whatsoever.
This thing has to drive like ****.