MSM Crank No Start
#1
MSM Crank No Start
Car cranks but wont start.
I have confirmed its getting fuel and spark.
Car has a MS PNP PRO and ID1000s.
Composite logs won't work so I replaced both cam and crank sensors. Tooth logger does show data.
Plugged in dead time and small PW settings supplied from ID.
Cranking pulse at 300%
Scaled basemap VE table up 50% and set req fuel to compensate for injectors.
Tune is attached, logs don't show anything so no point in attaching those. OG MSM.msq
I just updated firmware from 1.3.4 to the latest 1.5.1 and was presented with a ton of errors.
I have confirmed its getting fuel and spark.
Car has a MS PNP PRO and ID1000s.
Composite logs won't work so I replaced both cam and crank sensors. Tooth logger does show data.
Plugged in dead time and small PW settings supplied from ID.
Cranking pulse at 300%
Scaled basemap VE table up 50% and set req fuel to compensate for injectors.
Tune is attached, logs don't show anything so no point in attaching those. OG MSM.msq
I just updated firmware from 1.3.4 to the latest 1.5.1 and was presented with a ton of errors.
Thread
Thread Starter
Forum
Replies
Last Post