When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Hey guys,
please confirm my ignorance/plan of action:
I'm running my 2000 with an MS3X, running the VSS input to Nitrous (MS3X-29) and getting no data. From what I understand, a +5v pullup is required for the VSS input in order for the MS3X to properly read the pulses?
Just want to confirm before I go crawling under the dash again to fix something I missed during assembly.
As a reward for reading this far, have a picture of a cat dancing on the beach: fabulous virtuoso
I'm troubleshooting a similar issue on my NB1. I had it wired into MS3X-29 Nitrous input and was getting no speed signal.
I then saw this thread and switched it to wire into MS3X-31 PT4 and changed the TunerStudio VSS settings accordingly.
I'm still getting no speed signal.
Any idea what might be going wrong and what to try next?
I'm troubleshooting a similar issue on my NB1. I had it wired into MS3X-29 Nitrous input and was getting no speed signal.
I then saw this thread and switched it to wire into MS3X-31 PT4 and changed the TunerStudio VSS settings accordingly.
I'm still getting no speed signal.
Any idea what might be going wrong and what to try next?
I moved it over to MSX-28 table input and everything is working now.
So is PT4 not the correct type of input for the miata vss signal?