hks_kansei

So i've been reading, and reading, and reading.
Plenty of info out there if you're building your own MS3X, and mentions of needing to add jumpers and stuff to work with a 99/00 NB8A

But I cant seem to find mentions of what, if anything, needs to be done to a prebuilt one? (other than solder up a patch harness to suit the factory plugs, and the usual tuning stuff)


Pics below of the exact unit I have, just in case there are differences in parts etc.

IMG_20190721_154729 by hks_kansei, on Flickr


IMG_20190721_155553 by hks_kansei, on Flickr


IMG_20190721_155614 by hks_kansei, on Flickr


IMG_20190721_155624 by hks_kansei, on Flickr


IMG_20190721_155635 by hks_kansei, on Flickr


Cheers in advance for the advice.

SpartanSV

​http://www.msextra.com/doc/pdf/html/...​​

It's all in there pal. If you go the route of increased resistance you gotta do some extra homework.

hks_kansei

aww, but where's the fun in that when I can just get others to do the work for me. :P




In all seriousness though, thanks for the link, can't believe I totally forgot that there's hardware documentation already.
Cheers.