MS3 Basic 99-00 Loose Jumper in case
#1
MS3 Basic 99-00 Loose Jumper in case
I am finally getting around to attempting to get a used MS3 Basic I bought on the forum into my car (life got in the way for a few months) and noticed that there was something shaking around in the case. I opened it up and found a loose jumper just flailing around in there. While i was in there i also found what appears to be a capacitor and a resistor soldered to the board leading nowhere? Anybody with an MS3 basic (99-00) have this going on? Any thoughts where this jumper should be? Let me know if the pictures don't work. I reached out to Dimitris without luck.
Unconnected cap and resistor??
I know this is a pretty stupid noob level post but if I don't get it sorted out I'm hesitant to throw it in the car, effectively making it an expensive useless aluminum box.............
Unconnected cap and resistor??
I know this is a pretty stupid noob level post but if I don't get it sorted out I'm hesitant to throw it in the car, effectively making it an expensive useless aluminum box.............
Thread
Thread Starter
Forum
Replies
Last Post