MS2 Flooding Engine on cold start
#1
Junior Member
Thread Starter
iTrader: (1)
Join Date: Sep 2010
Location: Scranton PA
Posts: 264
Total Cats: 4
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Car has been running fine on ms2 for 2 years, except for about 2 weeks ago. The problem only happens when the ambient temperature is over 80 degrees and only first start after being parked for a few hours. If the temperature is below 80 starts and runs fine. It actually will flood the engine to the point where it locks up during cranking. Once i get the engine running and cleared out it will start and run fine. I shut off the injector priming pulsewidth above 70 degrees coolant temp and removed tons of fuel out of the cranking settings and still had the problem today. I'm stumped.
Thread
Thread Starter
Forum
Replies
Last Post