MS2 Build help
#1
Junior Member
Thread Starter
iTrader: (3)
Join Date: Jul 2008
Location: Pinellas park Fl
Posts: 308
Total Cats: 1
MS2 Build help
Im building my MS2 and I have it all done, But im trying to look for a place to run an EBC and Vics Switch.
I have launch control wired to js11.
Joe P`s ign mods through js10.
Fan control through d15 and q7.
I know how to make the circuits for Vics and EBC i just dont know what ports i can use.
Any help ?
I have launch control wired to js11.
Joe P`s ign mods through js10.
Fan control through d15 and q7.
I know how to make the circuits for Vics and EBC i just dont know what ports i can use.
Any help ?
#6
Junior Member
Thread Starter
iTrader: (3)
Join Date: Jul 2008
Location: Pinellas park Fl
Posts: 308
Total Cats: 1
accorrding to his diagram i can use,
js2 for vics
js7 for launch
js11 for boost
there is already a diagram for building the boost circuit on the how to, but what do i follow for the other two ? if they have changed from ms 1.
js2 for vics
js7 for launch
js11 for boost
there is already a diagram for building the boost circuit on the how to, but what do i follow for the other two ? if they have changed from ms 1.
#9
Junior Member
Thread Starter
iTrader: (3)
Join Date: Jul 2008
Location: Pinellas park Fl
Posts: 308
Total Cats: 1
Ok vics is easy then, and just so I understand correctly, I can take a jumper from JS7 through a spare port on the db37 to ground and that will trigger vics when set up in Tunerstudios ?
Thread
Thread Starter
Forum
Replies
Last Post
StratoBlue1109
Miata parts for sale/trade
21
09-30-2018 01:09 PM