Ms1 extra no fan control and high idle
#1
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
So I've gotten my car running on ms1 extra, I still have a few bugs to work out but it's coming along halfway decent. My fans won't come on, tuner studio is saying that they should come on at 175 and there not
I'm sure it's a wiring problem, which wire does it come off on the ms harness? Also my iac valve when it's plugged in it revs to 2500 at stays there, I would like to keep it because of what it does. What settings could fix this and I think I have the pwm mod done wrong. So I'll look at that. On top of that my afrs are off by around .5 between both systems, I've calibrated my sensor several times to no avail. So if any one could point me in the right direction I would be happy. Thanks!
I'm sure it's a wiring problem, which wire does it come off on the ms harness? Also my iac valve when it's plugged in it revs to 2500 at stays there, I would like to keep it because of what it does. What settings could fix this and I think I have the pwm mod done wrong. So I'll look at that. On top of that my afrs are off by around .5 between both systems, I've calibrated my sensor several times to no avail. So if any one could point me in the right direction I would be happy. Thanks!
Thread
Thread Starter
Forum
Replies
Last Post
MiataKeith
General Miata Chat
0
02-25-2016 07:47 PM
vteckiller2000
Engine Performance
20
02-25-2016 06:31 PM
jaredfigdor
DIY Turbo Discussion
10
02-23-2016 12:54 PM