MS/TS going crazy?!
#1
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
It started yesterday with just the map reading flicking intermittently from it's correct values to '0' and back but upon check my logs in MLV, it didn't show up the issue.
This morning however on the way in to work all hell broke loose and nearly all the gauges just started going crazy about half way through my journey? I carried on driving as the car was unaffected in the way it drove. I then pulled over, re-started TS with the engine still running and all was well again until about another 5 minutes into my journey and the crazyness started up again.
I just checked the logs in MLV and all the crazyness shows up but as mentioned, the car runs flawlessly when this is happening as if nothing is actually wrong?
Does anyone have any ideas what the issue could be or have seen this happen before?
I've attached a log and the MSQ.
This morning however on the way in to work all hell broke loose and nearly all the gauges just started going crazy about half way through my journey? I carried on driving as the car was unaffected in the way it drove. I then pulled over, re-started TS with the engine still running and all was well again until about another 5 minutes into my journey and the crazyness started up again.
I just checked the logs in MLV and all the crazyness shows up but as mentioned, the car runs flawlessly when this is happening as if nothing is actually wrong?
Does anyone have any ideas what the issue could be or have seen this happen before?
I've attached a log and the MSQ.
![Name: MSdisplaygoingweird.jpg
Views: 61
Size: 161.0 KB](https://www.miataturbo.net/attachments/megasquirt-18/200560d1501242194-ms-ts-going-crazy-msdisplaygoingweird.jpg)
#3
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Haha, I can't believe you get it too Rich! ![facepalm](https://www.miataturbo.net/images/smilies/facepalm.gif)
Maybe it could be to with the serial to usb converter we are using (Maplin branded), although I've not had this happen at all since being squirted back in October?
I did also update to the latest TS version 2 days ago (ver 0.991)
Weirdly, I just checked for updates now and there is another one there (ver 0.991.1) which I have just upgraded to.
I'll pipe up on msextra too.
![facepalm](https://www.miataturbo.net/images/smilies/facepalm.gif)
Maybe it could be to with the serial to usb converter we are using (Maplin branded), although I've not had this happen at all since being squirted back in October?
I did also update to the latest TS version 2 days ago (ver 0.991)
Weirdly, I just checked for updates now and there is another one there (ver 0.991.1) which I have just upgraded to.
I'll pipe up on msextra too.
Thread
Thread Starter
Forum
Replies
Last Post
elesjuan
Build Threads
7
11-03-2015 01:51 PM