Mounting...
#12
Boost Czar
![](/mt2011/images_td/ranks/supporter1.gif)
![](/mt2011/images_td/ranks/admin.png)
Thread Starter
iTrader: (62)
Join Date: May 2005
Location: Chantilly, VA
Posts: 79,607
Total Cats: 4,102
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
I'd rock it next to the ECU, but since I have a nice big ABS ECU there, there aint no room....I was thinking of shoving it up behind the glovebox....plenty of room, but this way I have easy access to the serial port.
#13
Supporting Vendor
![](/mt2011/images_td/ranks/vendor.png)
![](/mt2011/images_td/ranks/supporter1.gif)
iTrader: (33)
Join Date: Jul 2006
Location: atlanta-ish
Posts: 12,659
Total Cats: 134
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
You could bracket the MS to behind the glovebox and leave the serial cable plugged in and hanging down, but tucked in there so it's not dangling. Then you reach in and pull it down when you need to, and tuck it back up when ya don't.
#14
Boost Czar
![](/mt2011/images_td/ranks/supporter1.gif)
![](/mt2011/images_td/ranks/admin.png)
Thread Starter
iTrader: (62)
Join Date: May 2005
Location: Chantilly, VA
Posts: 79,607
Total Cats: 4,102
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
it says Nippon ABS right on it, about the same size as the MS.
I was thinking about something like that....since it's only zipped in right now, i'll have a chance to dick around with it later.
but since my battery is dead and my stub is still leaking......
I was thinking about something like that....since it's only zipped in right now, i'll have a chance to dick around with it later.
but since my battery is dead and my stub is still leaking......