Megasquirt wiring help Please!!! 04 MSM
#1
Junior Member
Thread Starter
iTrader: (1)
Join Date: Mar 2013
Location: Traverse City, Michigan
Posts: 138
Total Cats: 4
Megasquirt wiring help Please!!! 04 MSM
This is for a 04 MSM
hey guys so im stumped and im sure its actually really simple...
Got my MS2 ehanced last year from Revrent and i am just getting to finishing the set up so help is greatly appeciated i havent found exactly what im looking for searching the mass amounts of megasquirt threads
here is my current delema how exactly to hook up everything.. also anythign else i need to concider wiring in thanks guys!!!!
• Complete pinout for the DB-37 connector:
Pin 1: Switched 12V do i run this power to my PLX wideband gague box that powers it? and put inline fuse 5amp
Pin 2: Ground i assume ground for PLX wideband gauge?
Pin 3: Analog ground
Pin 4: Wideband input wire the extra signal wire from PLX unit to this?
Pin 5: External MAP sensor
Pin 6: Ign C
Pin 7: Ign D
Pin 8: CANH
Pin 9: CANL
Pin 10: RPM out
Pin 11: Oil pressure input
Pin 12: Oil temperature input
Pin 13: Boost high/low switch
Pin 14: Switch tables
Pin 15: Launch button do i jsut connect a wire off the clutch switch?
Pin 16: Do not connect
Pin 17: Spare analog input
Pin 18: Flex input
Pin 19: Spare programmable output 1
Pin 20: EBC out
Pin 21: Ground
Pin 22 to 33: Do not connect
Pin 34: Flatshift on/off switch Clutch switch as well?
Pin 35: Valet on/off switch
Pin 36: PE1 digital input
Pin 37: Spare programmable output 2
hey guys so im stumped and im sure its actually really simple...
Got my MS2 ehanced last year from Revrent and i am just getting to finishing the set up so help is greatly appeciated i havent found exactly what im looking for searching the mass amounts of megasquirt threads
here is my current delema how exactly to hook up everything.. also anythign else i need to concider wiring in thanks guys!!!!
• Complete pinout for the DB-37 connector:
Pin 1: Switched 12V do i run this power to my PLX wideband gague box that powers it? and put inline fuse 5amp
Pin 2: Ground i assume ground for PLX wideband gauge?
Pin 3: Analog ground
Pin 4: Wideband input wire the extra signal wire from PLX unit to this?
Pin 5: External MAP sensor
Pin 6: Ign C
Pin 7: Ign D
Pin 8: CANH
Pin 9: CANL
Pin 10: RPM out
Pin 11: Oil pressure input
Pin 12: Oil temperature input
Pin 13: Boost high/low switch
Pin 14: Switch tables
Pin 15: Launch button do i jsut connect a wire off the clutch switch?
Pin 16: Do not connect
Pin 17: Spare analog input
Pin 18: Flex input
Pin 19: Spare programmable output 1
Pin 20: EBC out
Pin 21: Ground
Pin 22 to 33: Do not connect
Pin 34: Flatshift on/off switch Clutch switch as well?
Pin 35: Valet on/off switch
Pin 36: PE1 digital input
Pin 37: Spare programmable output 2
Last edited by ReallyRottenTurbo; 05-05-2014 at 11:56 AM.
#5
Elite Member
iTrader: (10)
Join Date: Jun 2006
Location: Athens, Greece
Posts: 5,990
Total Cats: 361
I've specifically made sure NEVER to mention any of my ECUs as "PNP" as not to confuse customers. I do tell them that it is plug and play, obviously any similarities end there.
Tara, emailed received, I will get back to you with answers in a couple of hours.
Thread
Thread Starter
Forum
Replies
Last Post
Zaphod
MEGAsquirt
47
10-26-2018 11:00 PM