Looking for Advice after First Tune/Drive After Mkturbo install
#1
Looking for Advice after First Tune/Drive After Mkturbo install
Hello,
I just installed the last of my MKturbo last night onto the car and gave it a quick tune so that I could get it home...took it out for a spin and drove it a little bit in boost. I am looking for any feedback really that could help improve it. I have scheduled someone to remote tune the car but its currently running on my ugly tune I put together in a few hours, as well as some autotune. Attached is the tune and the log file from driving home and around the block a few times.
I just installed the last of my MKturbo last night onto the car and gave it a quick tune so that I could get it home...took it out for a spin and drove it a little bit in boost. I am looking for any feedback really that could help improve it. I have scheduled someone to remote tune the car but its currently running on my ugly tune I put together in a few hours, as well as some autotune. Attached is the tune and the log file from driving home and around the block a few times.
#2
Cpt. Slow
iTrader: (25)
Join Date: Oct 2005
Location: Oregon City, OR
Posts: 14,360
Total Cats: 1,184
Your ignition table looks safe, air density table is good, and your injector settings look good. Fuel table is meh, but sounds like you're working on that. Only thing I'd say is your afr targets are lean in boost. Low boost at 12:1 should be ok. Set the 180 row to 11.6, 120 row to 12, then interpolate between. Your tuner should be able to take care of the rest. Keep auto tuning, comparing target afr to actual afr, making sure you're close.
Thread
Thread Starter
Forum
Replies
Last Post