Jumpy Idle
#1
Senior Member
Thread Starter
iTrader: (3)
Join Date: Apr 2007
Location: Odenton, MD
Posts: 713
Total Cats: 0
Jumpy Idle
Okay, i get a jumpy idle from 900-1000. Is this MS related? All i've done is calibrate my TPS and did the basic timing setting.
I still need to burp my radiator, but i didnt have the problem before MS. Any solutions?
I still need to burp my radiator, but i didnt have the problem before MS. Any solutions?
#2
Supporting Vendor
iTrader: (5)
Join Date: Jun 2006
Location: Duluth, GA 30097
Posts: 803
Total Cats: 0
Shoot us a datalog of this occuring to websales@diyautotune.com, along with a description (I'm out of town and it may be Matt that looks at it) and we'll see what we can find...
In our base map the Idle control code is configured to control idle within about a 130rpm range... so it want take steps to 'correct' the idle if it's within 130rpm of 950 when fully warm. You can try tightening that up a bit, but too tight and you can cause it to overcorrect. The idle code is a bit touchy to tune but should work pretty well for you-- My car feels pretty much like stock with the settings in the base map.
In our base map the Idle control code is configured to control idle within about a 130rpm range... so it want take steps to 'correct' the idle if it's within 130rpm of 950 when fully warm. You can try tightening that up a bit, but too tight and you can cause it to overcorrect. The idle code is a bit touchy to tune but should work pretty well for you-- My car feels pretty much like stock with the settings in the base map.
__________________
Jerry a.k.a. 'FoundSoul'
DIYAutoTune.com
'91 Miata BEGi S3 GT2560 w/ MSPNP - 14.1psi - 253whp, 232wtq
'95 Miata n/a
A few other cars....
Jerry a.k.a. 'FoundSoul'
DIYAutoTune.com
'91 Miata BEGi S3 GT2560 w/ MSPNP - 14.1psi - 253whp, 232wtq
'95 Miata n/a
A few other cars....
Thread
Thread Starter
Forum
Replies
Last Post
StratoBlue1109
Miata parts for sale/trade
21
09-30-2018 01:09 PM
JesseTheNoob
DIY Turbo Discussion
15
09-30-2015 02:44 PM