How to use the TinyIOx
#21
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
You should be able to use the tinyiox for boost control. I think these settings will work but I can't be 100% sure until I test it.
MS2 CAN Settings:
![](https://www.miataturbo.net/attachments/megasquirt-18/172626-how-use-tinyiox-x4whfwv.png?dateline=1464357445)
Set port 1 to 'single value (one signal)' and use ID: 4, table: 7, offset: 45.
Boost Control Settings:
![](https://www.miataturbo.net/attachments/megasquirt-18/172627-how-use-tinyiox-q9mvqrz.png?dateline=1464357445)
Set boost control location to 'remote' and the port to 'port 1'
TinyIOx Port Settings:
![](https://www.miataturbo.net/attachments/megasquirt-18/172628-how-use-tinyiox-90gotuf.png?dateline=1464357445)
Set port type to 'single value (PWM output) and then choose either TPMCH0 or TPMCH1
As for the EGT you'll have to buy/build an amplifier that outputs a 0-5V to the tinyiox.
MS2 CAN Settings:
![](https://www.miataturbo.net/attachments/megasquirt-18/172626-how-use-tinyiox-x4whfwv.png?dateline=1464357445)
Set port 1 to 'single value (one signal)' and use ID: 4, table: 7, offset: 45.
Boost Control Settings:
![](https://www.miataturbo.net/attachments/megasquirt-18/172627-how-use-tinyiox-q9mvqrz.png?dateline=1464357445)
Set boost control location to 'remote' and the port to 'port 1'
TinyIOx Port Settings:
![](https://www.miataturbo.net/attachments/megasquirt-18/172628-how-use-tinyiox-90gotuf.png?dateline=1464357445)
Set port type to 'single value (PWM output) and then choose either TPMCH0 or TPMCH1
As for the EGT you'll have to buy/build an amplifier that outputs a 0-5V to the tinyiox.
#24
SADFab Destructive Testing Engineer
![](/mt2011/images_td/ranks/supporter1.gif)
![](/mt2011/images_td/ranks/moderator.png)
Thread Starter
iTrader: (5)
Join Date: Apr 2014
Location: Beaverton, USA
Posts: 18,642
Total Cats: 1,866
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Ive been doing some tinyIOx wiring. Got the EGT circuit built. and 2 of the ADC input protection circuits. Plugged everything back in for a proof of concept test.
Probably the last time this motor will run in the car.
Took some screenshots of my settings if anyone wants to follow along.
![Name: kxsaXSW.png
Views: 243
Size: 1.14 MB](https://www.miataturbo.net/attachments/megasquirt-18/231836d1683052892-how-use-tinyiox-kxsaxsw.png)
![Name: NFU6x44.png
Views: 230
Size: 350.5 KB](https://www.miataturbo.net/attachments/megasquirt-18/231837d1683052892-how-use-tinyiox-nfu6x44.png)
![Name: Q8BeeJk.png
Views: 236
Size: 131.2 KB](https://www.miataturbo.net/attachments/megasquirt-18/231838d1683052892-how-use-tinyiox-q8beejk.png)
Probably the last time this motor will run in the car.
Took some screenshots of my settings if anyone wants to follow along.
![Name: kxsaXSW.png
Views: 243
Size: 1.14 MB](https://www.miataturbo.net/attachments/megasquirt-18/231836d1683052892-how-use-tinyiox-kxsaxsw.png)
![Name: NFU6x44.png
Views: 230
Size: 350.5 KB](https://www.miataturbo.net/attachments/megasquirt-18/231837d1683052892-how-use-tinyiox-nfu6x44.png)
![Name: Q8BeeJk.png
Views: 236
Size: 131.2 KB](https://www.miataturbo.net/attachments/megasquirt-18/231838d1683052892-how-use-tinyiox-q8beejk.png)
![Name: FRQzxcj.png
Views: 240
Size: 211.2 KB](https://www.miataturbo.net/attachments/megasquirt-18/231839d1683052892-how-use-tinyiox-frqzxcj.png)