Hey guys, I need some help
#1
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
So I have just installed my megasquirt about a week ago my timing is set correctly, my sensors are all installed. I have the Megasquirt PNPGen2 with Innovate Standalone Gauge Kit with LC-2 and the GM Open Element IAT Sensor.
The problem I am having is that my car will not go above 2200RPM, any advise on this would be awesome.
Before installing the megasquirt I replaced the coil pack with plugs and wires, fuel pump and fuel filter and fuel pressure regulator.
Also When I tried to calibrate my TPS at No throttle and at Full throttle I get the same reading.
I made sure all of my vacuum line are not leaking and all of the hose clamps are tight
Thanks for any advice,
Mitch
The problem I am having is that my car will not go above 2200RPM, any advise on this would be awesome.
Before installing the megasquirt I replaced the coil pack with plugs and wires, fuel pump and fuel filter and fuel pressure regulator.
Also When I tried to calibrate my TPS at No throttle and at Full throttle I get the same reading.
I made sure all of my vacuum line are not leaking and all of the hose clamps are tight
Thanks for any advice,
Mitch
Thread
Thread Starter
Forum
Replies
Last Post