Help me cure my Resets b4 NE Dyno Day!!!!
#1
Junior Member
Thread Starter
iTrader: (12)
Join Date: Oct 2007
Location: Central, NJ
Posts: 487
Total Cats: 1
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
So my new setup is complete!
95 1.8L \ exintake cam in 90 Chassis
ETD Greddy 1.8L Manifold
Greddy turbo from the 1.6L Kit
3" racing mazda DP
FM Turbo Single Exhaust
460cc inj.
Toyota Cops
DIY MS
Oil Cooler/Filter relocate
Suspension/Brakes/Torsen/etc....
I really want to bring it to NE Dyno Day because i dont think anyone has ever dyno'ed a setup like mine, but i have one major problem. These Damn resets at 9psi or above....
Stuff i've tried:
Plugs gapped all the way down to .020" (feels the same at .035 and .020)
Tapped back of 1.8L head to ground the stock 1.6l ecu grounds
Stock ignition (to eliminate some sort of coil issue)
ran two extra ground wires from ecu to head
added an extra ground from battery to chassis in the trunk
Removed my LC1 to eliminate a noise issue
Cut the black/green sensor ground at back of head (its now reconnected)
Removed all the stock ecu ground ring terminals and connected them all to one copper ring terminal for ground.
What else is left for me to try before i pull out all my hair and fire bomb this car?
95 1.8L \ exintake cam in 90 Chassis
ETD Greddy 1.8L Manifold
Greddy turbo from the 1.6L Kit
3" racing mazda DP
FM Turbo Single Exhaust
460cc inj.
Toyota Cops
DIY MS
Oil Cooler/Filter relocate
Suspension/Brakes/Torsen/etc....
I really want to bring it to NE Dyno Day because i dont think anyone has ever dyno'ed a setup like mine, but i have one major problem. These Damn resets at 9psi or above....
Stuff i've tried:
Plugs gapped all the way down to .020" (feels the same at .035 and .020)
Tapped back of 1.8L head to ground the stock 1.6l ecu grounds
Stock ignition (to eliminate some sort of coil issue)
ran two extra ground wires from ecu to head
added an extra ground from battery to chassis in the trunk
Removed my LC1 to eliminate a noise issue
Cut the black/green sensor ground at back of head (its now reconnected)
Removed all the stock ecu ground ring terminals and connected them all to one copper ring terminal for ground.
What else is left for me to try before i pull out all my hair and fire bomb this car?
#6
Junior Member
Thread Starter
iTrader: (12)
Join Date: Oct 2007
Location: Central, NJ
Posts: 487
Total Cats: 1
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Will this help me?
https://www.miataturbo.net/forum/t31769-2/
Also what about running a shielded wire from my cas to my MS?
https://www.miataturbo.net/forum/t31769-2/
Also what about running a shielded wire from my cas to my MS?
#8
Junior Member
Thread Starter
iTrader: (12)
Join Date: Oct 2007
Location: Central, NJ
Posts: 487
Total Cats: 1
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
just 460's... I switched back to the pnptiming map (for safety) and took out 15% fuel in my boost cells. Seems to have helped a bunch but im not totally cured. Im going to try and pull in my afr's some more and then connect 2a,2b,2c,2d to one 10gauge ground wire and run it to the back of the head.... Hopefully that does. Anyone find a place locally that sells that noise filter? Seems nice to have...
#17
Junior Member
Thread Starter
iTrader: (12)
Join Date: Oct 2007
Location: Central, NJ
Posts: 487
Total Cats: 1
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
ok here is a recent log plus it's respective msq. Still got one reset and i have narrowed it down to the aceleration wizard not being setup right... I think. Anyone tune there mapdot on a 1.8L? No tps FTL! Also can someone look at my CLT graph. Is that too noisy by the one reset that i did have?
I may be at dyno day afterall...
I may be at dyno day afterall...
Thread
Thread Starter
Forum
Replies
Last Post
Motorsport-Electronics
ECUs and Tuning
0
09-05-2015 08:02 AM
JasonC SBB
Insert BS here
32
10-26-2011 11:18 AM