Help with EAE tuning
#1
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
I've done some reading on EAE and it's as clear as mud to me ![](https://www.miataturbo.net/images/smilies/smile.gif)
The car drives fine and if i'm over 3k rpm and stab the throttle it responds fine. It's just bogging down if I stab the throttle from idle or low rpm. I've also found that it bogs down when i try blipping the throttle on downchanges (not my technique here as I used to be able to do this fine on the standard ecu)
Where do I start? Is it the stuck to walls constants and if so which way do I go? If there's an idiots guide out there could you point me in the right direction.
![](https://www.miataturbo.net/images/smilies/smile.gif)
The car drives fine and if i'm over 3k rpm and stab the throttle it responds fine. It's just bogging down if I stab the throttle from idle or low rpm. I've also found that it bogs down when i try blipping the throttle on downchanges (not my technique here as I used to be able to do this fine on the standard ecu)
Where do I start? Is it the stuck to walls constants and if so which way do I go? If there's an idiots guide out there could you point me in the right direction.
Thread
Thread Starter
Forum
Replies
Last Post
StratoBlue1109
Miata parts for sale/trade
21
09-30-2018 01:09 PM