Eriki's MS1 Questions
#1
Senior Member
Thread Starter
iTrader: (5)
Join Date: May 2011
Location: London,OH
Posts: 1,139
Total Cats: 13
Eriki's MS1 Questions
So eriki and i are out in his garage getting his ms in and running, two things are coming up right now 1. even changing the settings in easy therm dont fix the coolant temp, its reading 170degrees when its cold. and his fresh out of the package mtx is only reading fully lean with the car running( its been calibrated 3-4 times with the same results.
#4
Tadd there is a 10degree marking to go off of on my crank pulley its differnt from yours, when the car is cold it does not like to start or idle untill warm. i have to give it gas as i crank it over for it to start and hold the gas for it to idle untill it warms up a bit. Would that be a timing issue or fuel or even both?
#14
Cpt. Slow
iTrader: (25)
Join Date: Oct 2005
Location: Oregon City, OR
Posts: 14,429
Total Cats: 1,207
Yeah, it's a little sad Mazda (and many other engine manufacturers) rely on a shitty piece of plastic that likes to self machine on the pulley and melt to do something as important as time the engine.
But you need one.
Tadd, for the fuel tables, there's a great thread in the "SUPER important MegaSquirt threads" thread.
But you need one.
Tadd, for the fuel tables, there's a great thread in the "SUPER important MegaSquirt threads" thread.