engine running. where to get base maps
#1
engine running. where to get base maps
As above I have my engine and diy ms2 running now (purely off the engine/ignition constants). It idles ok but runs badly which I'd kind of expect at this stage. Waiting for my wideband kit to arrive.
Where is a good source of maps/tables to give me a head start on tuning side of things. I did see a few on the MS diypnp site.
Two other questions-
1*I have not touched the acceleration enrichments yet so is it normal that the engine will splutter and nearly stall the moment I open the throttle (I'm thinking yes but maybe I've plumbed something else wrong)
2*Rev limiter doesn't appear to work. I set it real low (3000rpm) to test it and it seemed to do nothing
My setup is a 1.8 bp engine with tdo4 and small intercooler, 380cc rx8 injectors, no idle valve
Where is a good source of maps/tables to give me a head start on tuning side of things. I did see a few on the MS diypnp site.
Two other questions-
1*I have not touched the acceleration enrichments yet so is it normal that the engine will splutter and nearly stall the moment I open the throttle (I'm thinking yes but maybe I've plumbed something else wrong)
2*Rev limiter doesn't appear to work. I set it real low (3000rpm) to test it and it seemed to do nothing
My setup is a 1.8 bp engine with tdo4 and small intercooler, 380cc rx8 injectors, no idle valve
#2
Elite Member
iTrader: (21)
Join Date: Jun 2007
Location: Rochester, NY
Posts: 6,633
Total Cats: 1,284
MegaSquirtPNP by DIYAutoTune.com
Get the wideband in before you do anything else.
Also, your injectors may be a little on the small side.
Get the wideband in before you do anything else.
Also, your injectors may be a little on the small side.
Thread
Thread Starter
Forum
Replies
Last Post