DIYPNP install: inital tuning
#282
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Just to relate all these graphs to reality, I uploaded a video. This is still with 3.1.1 mariob v5 code (D term not yet corrected). Spark and table switching with AC switch, and the AC compressor is on a time delay relay (here shortened a bit from the graphs posted). It's relatively stable with AC, but has some issues with headlights & AC on at the same time. I need to smoothen the VE table in that area.
Lots of noise in the background. There really is a vacuum cleaner running in the background, it's not my supercharger
Lots of noise in the background. There really is a vacuum cleaner running in the background, it's not my supercharger
![big grin](https://www.miataturbo.net/images/smilies/biggrin.gif)
#288
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Car didn't start with the test code. Will wait for a new one.
In the meantime, I continued smoothing out the VE tables looking at gVE, and got the lights + AC to idle fairly well!
I was curious if I could get away with no tableswitching. Here's how it is with spark & table switching off:
It's actually not too bad. The dips are bigger- the instant spark bump from table switching must help out there. But perhaps putting a small slope in the spark table towards lower RPM (my spark tables are flat because I'm using table switching), plus the corrected D term in the next version will be enough to minimize the dip.
All 3 videos: P 25, I 12, D100
In the meantime, I continued smoothing out the VE tables looking at gVE, and got the lights + AC to idle fairly well!
I was curious if I could get away with no tableswitching. Here's how it is with spark & table switching off:
It's actually not too bad. The dips are bigger- the instant spark bump from table switching must help out there. But perhaps putting a small slope in the spark table towards lower RPM (my spark tables are flat because I'm using table switching), plus the corrected D term in the next version will be enough to minimize the dip.
All 3 videos: P 25, I 12, D100
Last edited by Greg G; 06-25-2011 at 04:38 AM.
#298
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Haven't had any garage time to fool around with the car this week :P
Arrrg. s19 is not a valid file type for uploading (!)
Could we get that fixed?
Anyway I posted it in MSExtra:
http://www.msextra.com/forums/viewto...289497#p289497
Have fun!
Greg
Arrrg. s19 is not a valid file type for uploading (!)
![facepalm](https://www.miataturbo.net/images/smilies/facepalm.gif)
Anyway I posted it in MSExtra:
http://www.msextra.com/forums/viewto...289497#p289497
Have fun!
Greg