Composite Log No Data
#1
Composite Log No Data
Hey guys,
Im trying to take a composite log on my car (crank no start) to check for cam/crank signals. For some reason I am not seeing any data or data traces. Logs show 0 kb.
My procedure is as follows:
1. Start log
2. crank for 5sec
3. stop log
4. click file, save log as "xyz"
What am I missing?
Edit: It might be worth noting that the ECU is on firmware 1.3.4. So there might be an alignment issue here between TS and MS. However, when I try to update the firmware, it asks for files that don't exist.
Im trying to take a composite log on my car (crank no start) to check for cam/crank signals. For some reason I am not seeing any data or data traces. Logs show 0 kb.
My procedure is as follows:
1. Start log
2. crank for 5sec
3. stop log
4. click file, save log as "xyz"
What am I missing?
Edit: It might be worth noting that the ECU is on firmware 1.3.4. So there might be an alignment issue here between TS and MS. However, when I try to update the firmware, it asks for files that don't exist.
Last edited by icantlearn; 01-15-2021 at 11:19 PM.
#6
update, I replaced the cam/crank sensors and still not starting. I do hear some starter kickback, so maybe there is an ignition timing issue while cranking?
Edit: I tried loading the basemap, adjusting req fuel for the injectors, and no luck there either.
Edit: I tried loading the basemap, adjusting req fuel for the injectors, and no luck there either.
Last edited by icantlearn; 01-17-2021 at 01:56 AM.
Thread
Thread Starter
Forum
Replies
Last Post
scottv
MEGAsquirt
2
01-03-2013 02:31 PM