Hello

I'm running a DIYPNP in a -99 NB 10ae euro-model. Had the ECU for ~week now, learning to tune it etc. Will be equipping the car with a m45 s/c in couple weeks.

Atm the car is running quite good, acceleration and idle are smooth; with cold, and hot engine. Would appreciate any tips / feedback regarding my maps. The igntion map is DIYPNP stock map (for my specific car obviously), AFR table is generated with tunerstudios, and VE table is generated & autotuned.

Also a log, if anyone has the time to check it out and point out anything obvious.
https://www.dropbox.com/s/73nszg9rc1...8_17.08.22.msl




VE map is still lacking in 4k+ rpm zone, 500-4000rpm cell change is pretty much all green.