6 position boost control
#1
SADFab Destructive Testing Engineer
![](/mt2011/images_td/ranks/supporter1.gif)
![](/mt2011/images_td/ranks/moderator.png)
Thread Starter
iTrader: (5)
Join Date: Apr 2014
Location: Beaverton, USA
Posts: 18,642
Total Cats: 1,866
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
6 position switch (5 x Rotary Switch Potentiometer 2pole 6POSITION 15pin | eBay)
A resistor network. (Chief Delphi - View Profile: ZZII 527)
This will give me a 0-5V input in 6 steps.
Set this up as a linear sensor in tunerstudio
![](https://www.miataturbo.net/attachments/build-threads-57/155229-aidans-loose-oily-bunghole-actually-runs-track-lap-9qo8yvg.png?dateline=1447782724)
Set up boost blending. Max boost in table 2, min boost in table 1.
Have 6 levels of boost control!! Wooo
Same switch can be used for launch control and traction control
A resistor network. (Chief Delphi - View Profile: ZZII 527)
This will give me a 0-5V input in 6 steps.
Set this up as a linear sensor in tunerstudio
![](https://www.miataturbo.net/attachments/build-threads-57/155229-aidans-loose-oily-bunghole-actually-runs-track-lap-9qo8yvg.png?dateline=1447782724)
Set up boost blending. Max boost in table 2, min boost in table 1.
Have 6 levels of boost control!! Wooo
Same switch can be used for launch control and traction control
#7
SADFab Destructive Testing Engineer
![](/mt2011/images_td/ranks/supporter1.gif)
![](/mt2011/images_td/ranks/moderator.png)
Thread Starter
iTrader: (5)
Join Date: Apr 2014
Location: Beaverton, USA
Posts: 18,642
Total Cats: 1,866
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Orrrr, you do a dual table flex blend using Blend Curve (8). And the **** based table Blend Curve (6). Then you have 6 positions of boost that also vary based on ethanol content.*
![Party Kitty](https://www.miataturbo.net/images/smilies/birthday[1].gif)
(either way you should be using Blend Curve 8 for Flex blending, because it effects all of the tables.)
*I have not tried this. And I'm not at my car to see if the MS freaks out if I set it up like this.
![Party Kitty](https://www.miataturbo.net/images/smilies/birthday[1].gif)
(either way you should be using Blend Curve 8 for Flex blending, because it effects all of the tables.)
*I have not tried this. And I'm not at my car to see if the MS freaks out if I set it up like this.
Last edited by aidandj; 11-17-2015 at 02:36 PM.
#8
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Orrrr, you do a dual table flex blend using Blend Curve (8). And the **** based table Blend Curve (6). Then you have 6 positions of boost that also vary based on ethanol content.
![Party Kitty](https://www.miataturbo.net/images/smilies/birthday[1].gif)
(either way you should be using Blend Curve 8 for Flex blending, because it effects all of the tables.)
![Party Kitty](https://www.miataturbo.net/images/smilies/birthday[1].gif)
(either way you should be using Blend Curve 8 for Flex blending, because it effects all of the tables.)
![Name: NwKXNav.gif
Views: 130
Size: 4.92 MB](https://www.miataturbo.net/attachments/megasquirt-18/232543d1683053186-6-position-boost-control-nwkxnav.gif)
Interested in outcome from both of you.
![likecat](https://www.miataturbo.net/images/smilies/likecat.png)
#19
SADFab Destructive Testing Engineer
![](/mt2011/images_td/ranks/supporter1.gif)
![](/mt2011/images_td/ranks/moderator.png)
Thread Starter
iTrader: (5)
Join Date: Apr 2014
Location: Beaverton, USA
Posts: 18,642
Total Cats: 1,866
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Yes. Blending boost tables on ethanol % is awesome.
Vlad just for you I'm going to talk yank into doing this on his car. Because he is already running flex fuel and boost control.
Vlad just for you I'm going to talk yank into doing this on his car. Because he is already running flex fuel and boost control.