1.6l ms3 spark cut at 1800rpm
#1
Junior Member
Thread Starter
iTrader: (1)
Join Date: Feb 2015
Location: Farmington Hills, MI
Posts: 137
Total Cats: 16
1.6l ms3 spark cut at 1800rpm
As the title says I'm having issues with spark cut at 1800rpm. It starts and idles fine but when throttle is increased to 1800rpm the tach jumps around. I tried the set igntion to 10 degrees and adjust the spark latency while using a timing light method to no avail. As far as I can tell there aren't any other factors that would cause spark to cut this early is the rev range. Attached is the .msq.
Setup:
1.6
ms3
m45 supercharger
stock coils
afm removed
I am a noob so any help is appreciated. Thanks!
Setup:
1.6
ms3
m45 supercharger
stock coils
afm removed
I am a noob so any help is appreciated. Thanks!
#7
Senior Member
iTrader: (1)
Join Date: Dec 2010
Location: Farmington Hills, MI
Posts: 1,218
Total Cats: 175
The firmware was flashed outside of the vehicle while powered by a JimStim. The MS3 was plugged in at first with a map configured for a '99 (but not attempted to start), then the 1.6 base map was flashed before first start.