New to the Page and need advice
#1
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Hey my name trevor I'm new to the page. I've read a lot about brainiacs and underdogs t3 50 Trim build. I decided to order one my self last night and noticed right after that I got the wrong one because it didn't have an internal waste gate and didn't have the vband outlet. Other then that I believe it's the same turbo. The compressor wheel inducer is 42.50 mm and exducer 60mm and the turbine wheel inducer is 64 mm and exducer 46mm. Here is the link to the turbo Universal T3 TURBO CHARGER 45 trim STAGE III HONDA ACURA VOLVO AUDI JETTA GOlF | eBay
so for those of you that know about the turbo I'm talking about, is it the same turbo minus the waste gate and vband? If it is I will just go for a external waste gate setup. The same one underdog did.
and yes I know I am a noob.
so for those of you that know about the turbo I'm talking about, is it the same turbo minus the waste gate and vband? If it is I will just go for a external waste gate setup. The same one underdog did.
and yes I know I am a noob.
#2
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
This is the wastegate/v band adapter (probably). T3 T3/T4 5 Bolt Turbo Downpipe Flange To 2.5" V-Band Conversion Adaptor Kit Set | eBay
You clearly have not followed the basic miataturbo.net advice of READ BEFORE YOU BUY.
Do not buy ANYTHING until you've read for 6 months more than you think you'd need to.
Let everybody here yell at you and tell you the right things to do and LISTEN.
DON'T BUY
READ
You clearly have not followed the basic miataturbo.net advice of READ BEFORE YOU BUY.
Do not buy ANYTHING until you've read for 6 months more than you think you'd need to.
Let everybody here yell at you and tell you the right things to do and LISTEN.
DON'T BUY
READ
#9
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Hey my name trevor I'm new to the page. I've read a lot about brainiacs and underdogs t3 50 Trim build. I decided to order one my self last night and noticed right after that I got the wrong one because it didn't have an internal waste gate and didn't have the vband outlet. Other then that I believe it's the same turbo. The compressor wheel inducer is 42.50 mm and exducer 60mm and the turbine wheel inducer is 64 mm and exducer 46mm. Here is the link to the turbo Universal T3 TURBO CHARGER 45 trim STAGE III HONDA ACURA VOLVO AUDI JETTA GOlF eBay
so for those of you that know about the turbo I'm talking about, is it the same turbo minus the waste gate and vband? If it is I will just go for a external waste gate setup. The same one underdog did.
and yes I know I am a noob.
so for those of you that know about the turbo I'm talking about, is it the same turbo minus the waste gate and vband? If it is I will just go for a external waste gate setup. The same one underdog did.
and yes I know I am a noob.
#10
mkturbo.com
![](/mt2011/images_td/ranks/supporter1.gif)
![](/mt2011/images_td/ranks/admin.png)
iTrader: (24)
Join Date: May 2006
Location: Charleston SC
Posts: 15,189
Total Cats: 1,685
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
The rear v-band housing does not bolt onto that turbo correctly. Only 1 of the holes line up on the housing that comes on it and the v-band adapter piece. I don't think it is possible to redress to make it fit correctly.
#11
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Well thanks for all of the advice and suggestions. My turbo and taco taco manifold arrive at my house today but I'll probably be sending them right back. Just one last question and then I'll put this subject to rest. What if I ditched the vband adapter idea and just had a downpipe made with a 4 bolt flange that would bolt right up to the turbo and then attempted the same external wastegate setup underdog did? I understand it may be harder then I think but I'm willing to take a risk with the 120$ manifold. I'm confident I can do it but if I mess up oh well. Here is a link to the external wastgate setup I want to do but I'm sure you guys have already seen it. Mazda Miata Turbo | Tial MVS 38mm External Wastegate Install
#13
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
i fabricate. If someone wanted a custom DP with external WG, I would probably charge you at least 300, probably more like 400. Unless your fab guys work for pennies...A lot of F-ing work right there, especially for a 1 off part.
changed my mind, external gate adds a lot of complexity. my price just went to 500.
changed my mind, external gate adds a lot of complexity. my price just went to 500.
#14
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
i fabricate. If someone wanted a custom DP with external WG, I would probably charge you at least 300, probably more like 400. Unless your fab guys work for pennies...A lot of F-ing work right there, especially for a 1 off part.
changed my mind, external gate adds a lot of complexity. my price just went to 500.
changed my mind, external gate adds a lot of complexity. my price just went to 500.
#15
Elite Member
iTrader: (2)
Join Date: Aug 2016
Location: New Fucking Jersey
Posts: 3,890
Total Cats: 143
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
By committing to the wrong turbo and continuing to buy parts when folks are telling you to hold up, you're just going to keep making life more difficult for yourself...
There have been builds done with the tacotaco manifold. Why not find a few of those and read what folks did for their setup?
I bought my setup from a member here and he did the ewg thang on an FM manifold. My build thread has pictures of his work if you're going to keep on going down this path.
Point is, you're going to spend more time and money doing things this way and get endlessly frustrated. If that sounds fun to you then have at it, but there are so many options these days that it's facepalm worthy. Hell the mkturbo setup is awesome at a solid price and the kraken manifold on the classifieds looks pretty great and is a very reasonable price too.
There have been builds done with the tacotaco manifold. Why not find a few of those and read what folks did for their setup?
I bought my setup from a member here and he did the ewg thang on an FM manifold. My build thread has pictures of his work if you're going to keep on going down this path.
Point is, you're going to spend more time and money doing things this way and get endlessly frustrated. If that sounds fun to you then have at it, but there are so many options these days that it's facepalm worthy. Hell the mkturbo setup is awesome at a solid price and the kraken manifold on the classifieds looks pretty great and is a very reasonable price too.
#16
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Most downpipes are 400$ anyway and if i went with the taco taco I have to get a custom down pipe no matter what. Underdog makes it look pretty simple. I could understand that it would be very complex and hard if I was wanting to recirculate it into the down pipe but I would just make a open dump . What makes it so much more difficult then an internal wasgegate? I'm sure I'm missing something here, I just don't know what it is.
a merged External set up is not worthy of a stock bottom end, **** turbo. that is for megabuck builds. you are not that.
#18
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Why don't you just buy a MK Turbo kit. Seriously. LOL @ people buying $200 turbos then having to pay $1200 to fab **** up to make em work, and they still suck. At least buy a freaking turbo that we have kits based on. My churbo cost $165 and bolts to damn near any available manifold and downpipe, I don't get it.
I've also not seen one mention of engine management. Better get a hold of someone who sells power cards, stat.
I've also not seen one mention of engine management. Better get a hold of someone who sells power cards, stat.
#19
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Why don't you just buy a MK Turbo kit. Seriously. LOL @ people buying $200 turbos then having to pay $1200 to fab **** up to make em work, and they still suck. At least buy a freaking turbo that we have kits based on. My churbo cost $165 and bolts to damn near any available manifold and downpipe, I don't get it.
I've also not seen one mention of engine management. Better get a hold of someone who sells power cards, stat.
I've also not seen one mention of engine management. Better get a hold of someone who sells power cards, stat.
#20
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Why don't you just buy a MK Turbo kit. Seriously. LOL @ people buying $200 turbos then having to pay $1200 to fab **** up to make em work, and they still suck. At least buy a freaking turbo that we have kits based on. My churbo cost $165 and bolts to damn near any available manifold and downpipe, I don't get it.
I've also not seen one mention of engine management. Better get a hold of someone who sells power cards, stat.
I've also not seen one mention of engine management. Better get a hold of someone who sells power cards, stat.