Intro and request for help
#1
Intro and request for help
I'm David from Albany NY area, I own a 93 mariner blue (first new car) and a 95M. I am in the process of rust removal/body work on the 93 and plan on a VVT swap and then maybe a turbo if I finish my current to do list before I'm 60.... Here is the 93 on my janky wood rotisserie
I pulled out the wiring harnesses and broke, or found some broken connectors. I looked a the connector sheet Leafy put together and several web sites but can't see to locate body electrical connections, mostly only engine related connectors. I have looked on Mouser and Digi-Key websites but no luck after hours of searching. Does anyone know of a source for body electrical connectors you can share? A few examples I am looking for here:
I believe this is a 6 way for the ignition switch:
and this 2 way in the left hand side of the trunk
thanks for any assistance
Also anyone from the San Francisco Bay Area take the BART to Albany NY?
Weird
I pulled out the wiring harnesses and broke, or found some broken connectors. I looked a the connector sheet Leafy put together and several web sites but can't see to locate body electrical connections, mostly only engine related connectors. I have looked on Mouser and Digi-Key websites but no luck after hours of searching. Does anyone know of a source for body electrical connectors you can share? A few examples I am looking for here:
I believe this is a 6 way for the ignition switch:
and this 2 way in the left hand side of the trunk
thanks for any assistance
Also anyone from the San Francisco Bay Area take the BART to Albany NY?
Weird
Last edited by Houleo; 06-04-2020 at 02:35 PM. Reason: fix photo size
#3
#10
Rugged Bager Racing's willingness to help me out and go out of their way to quickly send me the housings I needed demonstrates their excellent customer service, even though I am not a paying customer. If you are looking for break upgrades I can recommend them based on my experience and the quality products they sell.
#11
Wiring = my brain hurts
While I have the wiring harness out of the shell I am adding conductors for the 01-05 VVT engine I plan to install. Much time reading the definitive VVT swap thread and others. My notes and wiring plans so far
I have also added a ground and signal conductors for the 01-05 knock sensor.
IAT will be typical GM connected to the AFM plug
I think that covers all the sensors needed for the VVT swap
I have also added a ground and signal conductors for the 01-05 knock sensor.
IAT will be typical GM connected to the AFM plug
I think that covers all the sensors needed for the VVT swap
Thread
Thread Starter
Forum
Replies
Last Post
Stock
Build Threads
57
07-26-2024 06:53 PM