Hello, Community
#1
Junior Member
Thread Starter
iTrader: (2)
Join Date: Mar 2010
Location: Canada
Posts: 411
Total Cats: 0
Hello, Community
Hey people, my name's Nero. Call me whatever you wish. I drive a 1990 Eunos Roadster, which is on it's last leg (engine-wise, anyway). Here's a picture.
It's completely stripped, has bumper (the metal stuff - I know, not street safe) and reservoir deletes, has all the ViS carbon fiber parts (hood, trunk, hardtop), a modified GReddy turbo kit on my street engine (I hate it and have many choice words for it), Quaife gearset, Cusco MZ diff and a mess of suspension comprised of Cusco, Tanabe, RS*R, ST, Eibach and something else I can't remember. I took my bolt-in out because local regs won't pass it this year and I smashed my head on it pretty good from a pot-hole (all the more reason to take it out).
Anyway, hopefully I can jump right into a detailed build thread on my race engine (with an essentially-stock displacement of 1603 cm) in the next month or so. It's getting a Wiseco/Carillo forged set-up, knife-edged, balanced, P+P head, dual-spring valvetrain with 32/27 valves (with valve work) and some hefty cams. I'm pulling the ignition and fueling from the old get-up since it's too much for it anyway.
Hopefully I can put out an EPIC thread sooner rather than later and contribute some knowledge (or lack thereof) to the community.
It's completely stripped, has bumper (the metal stuff - I know, not street safe) and reservoir deletes, has all the ViS carbon fiber parts (hood, trunk, hardtop), a modified GReddy turbo kit on my street engine (I hate it and have many choice words for it), Quaife gearset, Cusco MZ diff and a mess of suspension comprised of Cusco, Tanabe, RS*R, ST, Eibach and something else I can't remember. I took my bolt-in out because local regs won't pass it this year and I smashed my head on it pretty good from a pot-hole (all the more reason to take it out).
Anyway, hopefully I can jump right into a detailed build thread on my race engine (with an essentially-stock displacement of 1603 cm) in the next month or so. It's getting a Wiseco/Carillo forged set-up, knife-edged, balanced, P+P head, dual-spring valvetrain with 32/27 valves (with valve work) and some hefty cams. I'm pulling the ignition and fueling from the old get-up since it's too much for it anyway.
Hopefully I can put out an EPIC thread sooner rather than later and contribute some knowledge (or lack thereof) to the community.
Last edited by E-NA6CE; 03-26-2010 at 01:22 PM. Reason: No More SS Valves - Too Weak
#4
Elite Member
iTrader: (1)
Join Date: May 2009
Location: Jacksonville, FL
Posts: 5,155
Total Cats: 407
One of the best first posts I have ever seen on this site. You capitalized letters, spelled words correctly and used punctuation properly.
In addition to this, you also seem very humble and intelligent.
You will fit right in here.
Car looks good, more pics of the turbo setup would be cool.
I really considered getting one of those vis CF hardtops a few years ago when my soft top formed holes, but I just got another soft top (unfortunately).
In addition to this, you also seem very humble and intelligent.
You will fit right in here.
Car looks good, more pics of the turbo setup would be cool.
I really considered getting one of those vis CF hardtops a few years ago when my soft top formed holes, but I just got another soft top (unfortunately).
#10
Junior Member
Thread Starter
iTrader: (2)
Join Date: Mar 2010
Location: Canada
Posts: 411
Total Cats: 0
One of the best first posts I have ever seen on this site. You capitalized letters, spelled words correctly and used punctuation properly.
In addition to this, you also seem very humble and intelligent.
You will fit right in here.
Car looks good, more pics of the turbo setup would be cool.
I really considered getting one of those vis CF hardtops a few years ago when my soft top formed holes, but I just got another soft top (unfortunately).
In addition to this, you also seem very humble and intelligent.
You will fit right in here.
Car looks good, more pics of the turbo setup would be cool.
I really considered getting one of those vis CF hardtops a few years ago when my soft top formed holes, but I just got another soft top (unfortunately).
The turbo set-up is essentially the same as every other GReddy set-up, except for the 3" turbo-back exhaust (A'PEXi mandrel-bent with their N1 turbo muffler), the plumbing for the front-mount (and the intercooler, too), the upgraded actuator and my FOURTH GReddy manifold, which is also cracked. Stupid GReddy.....
Last edited by E-NA6CE; 03-26-2010 at 01:24 PM. Reason: Proof-Reading Is Still Required
#11
Junior Member
Thread Starter
iTrader: (2)
Join Date: Mar 2010
Location: Canada
Posts: 411
Total Cats: 0
It's half track, half street. Should be all track, though (no side windows, no wiper blades), because it's really not street-legal and without the cage, a flying pebble will kill me. And hopefully people don't confuse him for me... that would be terrible. What other cool ****? I dunno... bits from HKS, Sparco, Mazdaspeed, Carbing and a gaping hole in my dash from where someone stole my GPS unit.
#15
Junior Member
Thread Starter
iTrader: (2)
Join Date: Mar 2010
Location: Canada
Posts: 411
Total Cats: 0
Are you serious??? FML sideways. Those are cheaper than what GReddy charged me for the first two manifolds I replaced.
Oh, and I thought you were talking about the intake manifold before, my bad.
Oh, and I thought you were talking about the intake manifold before, my bad.
#16
Junior Member
Thread Starter
iTrader: (2)
Join Date: Mar 2010
Location: Canada
Posts: 411
Total Cats: 0
Ha ha, yeah.... I crashed that thing last June. I'm trying to down-size my parking lot, so now all I have left is the Roadster, my '94 Legacy, '05 Civic, a '96 Taurus and an 18' Lund fishing boat that I haven't used in two years. Not really anything exciting. Sorry for any disappointment you experience while reading this post.
#19
Junior Member
Thread Starter
iTrader: (2)
Join Date: Mar 2010
Location: Canada
Posts: 411
Total Cats: 0
More pictures...
This next picture really is irrelevant, but I threw it at a co-worker and his facial expression had me in tears from laughing so I decided to post it. It was an awesome LAWL moment. And by awesome, I mean nothing else in my life has made me laugh so much. You should have been there.
This next picture really is irrelevant, but I threw it at a co-worker and his facial expression had me in tears from laughing so I decided to post it. It was an awesome LAWL moment. And by awesome, I mean nothing else in my life has made me laugh so much. You should have been there.