Pics of your wideband displays/gauges
#1
Elite Member
Thread Starter
iTrader: (1)
Join Date: Feb 2008
Location: Birmingham Alabama
Posts: 7,930
Total Cats: 45
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Im curious to see what some of you are running, how and where they are mounted. Im very picky with my gauges, since I like to match style and color, which really only leaves Autometer G2 green gauges, but they dont have a matching wideband for it (they do, but it looks like ***). Im guessing I will just have to bite the bullet and go for the LC-1 with XD-16. Ive installed 2 on other cars, and love the system, but was really hoping for something else. Ive actually thought about going as far as changing the rest of my gauges to match whatever wideband I get, or at least backlight color.
BTW, it doesnt just have to be wideband, Id like to also see your other gauges mounting locations and gauge style. I noticed other people asking in another topic about the posters boost gauge and water temp gauge, thought this thread might be helpful to some.
BTW, it doesnt just have to be wideband, Id like to also see your other gauges mounting locations and gauge style. I noticed other people asking in another topic about the posters boost gauge and water temp gauge, thought this thread might be helpful to some.
#2
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
I went with the Dynotune display for the LC-1 with Green backlight. Car isn't running right now but here's the gauge:
DynoTune Product, 029-WideBand Round Display for innovate Controllers - DynoTune, Nitrous systems, Purge kits, Nitrous Bottle heaters and more!
Frank
DynoTune Product, 029-WideBand Round Display for innovate Controllers - DynoTune, Nitrous systems, Purge kits, Nitrous Bottle heaters and more!
Frank
#10
Elite Member
Thread Starter
iTrader: (1)
Join Date: Feb 2008
Location: Birmingham Alabama
Posts: 7,930
Total Cats: 45
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
I would like to go with a pillar pod again just for simplicity, but I hated the gauges in my Turbo II. They were LED, and blinded me at night. Maybe some standard incandescent through the gauge lighting would be better and less blinding. Anything from about my 10 oclock to my 2 oclock was hard to see because of the super bright LED's. They were Sport Comp II.
#13
Elite Member
Thread Starter
iTrader: (1)
Join Date: Feb 2008
Location: Birmingham Alabama
Posts: 7,930
Total Cats: 45
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
I think I decided on Autometer Nexus gauges. They are expensive on a stupid level, but I really like the color selection feature, as well as an all red warning mode. Set the parameters to what you specify, and when it exceeds that parameter, the entire gauge lighting goes red. That would be helpful to avoid overboosting or overly lean conditions since I will most likely have the gauges installed under the radio, and out of easy sight. be much easier to see a bright red light that a needle 5 psi over what you want, or a slight lean condition. I figure with the control unit, wideband, boost and egt gauge, I will be about $1200 out of pocket...
Im OCD and very ---- about stuff matching. Might slim it down to a 2 gauge setup though, egt isnt a big deal, probably would be better to have something like oil temp first anyway.
![eek5](https://www.miataturbo.net/images/smilies/eek5.gif)