My MSM is finished!
#205
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
The 15x9 are nickel. The new 15x10 are tungsten. Saturday is probably the day for the wheels and hood cutting. Wheels came in yesterday and judging them alone without the nickel ones here to compare, id say they are a LITTLE darker but look great, more of a black chrome look, where the nickel was a bit more shiny I think. When I was deciding if Tungsten would be too dark for my Ti MSM, I think Emilio or Andrew said that most people wouldn't be able to tell the nickel and tungsten apart and whoever said it was pretty right, there is not a huge difference
#206
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
So even with the slight fender pull, the 10s appear to have some poke. I've not picked up the car yet so I don't know how it is in person
![](https://www.miataturbo.net/attachments/media-53/164642-my-msm-finished-80-f9282769_a491_4c51_a3dc_d6cac6ac821f_zpsp2m3tcqi_94e5d4445cf815680b311aba45dccd59f9f917c2.jpg?dateline=1457272993)
15x10 UL 245/40-15 Maxxis RC-1 NB rolled and pulled fenders ride height 4.5" pinch to ground in rear
My friend also cut my hood and installed these NC louvres which I really like a lot more than the NB version
![](https://www.miataturbo.net/attachments/media-53/164643-my-msm-finished-80-image_2a9f91605f9a0f660bd21c67048ed3333dc50d46.jpeg?dateline=1457272993)
Cut bracing.
![](https://www.miataturbo.net/attachments/media-53/164644-my-msm-finished-80-image_e1405b71620111a4694d615c0b4bd4a06cc0ba75.jpeg?dateline=1457272993)
Cut hood
![](https://www.miataturbo.net/attachments/media-53/164645-my-msm-finished-80-image_c6125677c4157302b2b7fbd5c887dec6e8b20eeb.jpeg?dateline=1457272993)
Side view showing angle and position
![](https://www.miataturbo.net/attachments/media-53/164646-my-msm-finished-80-image_ca6b787560528efd007b5966386911907f1d3138.jpeg?dateline=1457272993)
Great contour around the NB hump
![](https://www.miataturbo.net/attachments/media-53/164647-my-msm-finished-80-image_3f6a04e719d98d82092f46bbc966d9d112817b11.jpeg?dateline=1457272993)
Unsure of if I like the Wheel poke or not yet.
![](https://www.miataturbo.net/attachments/media-53/164642-my-msm-finished-80-f9282769_a491_4c51_a3dc_d6cac6ac821f_zpsp2m3tcqi_94e5d4445cf815680b311aba45dccd59f9f917c2.jpg?dateline=1457272993)
15x10 UL 245/40-15 Maxxis RC-1 NB rolled and pulled fenders ride height 4.5" pinch to ground in rear
My friend also cut my hood and installed these NC louvres which I really like a lot more than the NB version
![](https://www.miataturbo.net/attachments/media-53/164643-my-msm-finished-80-image_2a9f91605f9a0f660bd21c67048ed3333dc50d46.jpeg?dateline=1457272993)
Cut bracing.
![](https://www.miataturbo.net/attachments/media-53/164644-my-msm-finished-80-image_e1405b71620111a4694d615c0b4bd4a06cc0ba75.jpeg?dateline=1457272993)
Cut hood
![](https://www.miataturbo.net/attachments/media-53/164645-my-msm-finished-80-image_c6125677c4157302b2b7fbd5c887dec6e8b20eeb.jpeg?dateline=1457272993)
Side view showing angle and position
![](https://www.miataturbo.net/attachments/media-53/164646-my-msm-finished-80-image_ca6b787560528efd007b5966386911907f1d3138.jpeg?dateline=1457272993)
Great contour around the NB hump
![](https://www.miataturbo.net/attachments/media-53/164647-my-msm-finished-80-image_3f6a04e719d98d82092f46bbc966d9d112817b11.jpeg?dateline=1457272993)
Unsure of if I like the Wheel poke or not yet.
#212
Supporting Vendor
![](/mt2011/images_td/ranks/vendor.png)
![](/mt2011/images_td/ranks/supporter1.gif)
iTrader: (1)
Join Date: Sep 2010
Location: Lake Forest, CA
Posts: 7,976
Total Cats: 1,019
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Wow. They definitely look like they'll be rubbing like crazy. Hopefully that's not the case.
Those NC louvers looks awesome. Got me thinking now, even though I already have the NB louvers ready to go on.....
Those NC louvers looks awesome. Got me thinking now, even though I already have the NB louvers ready to go on.....
#213
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
You wouldn't be the first person who's seen the shot and wanted to go with NC vents. I just think they really flow well with the NB, more than the very straight edge NB louvres. Maybe Singular will come up with a "prettier" design one day, but I'm sure they all work. My local buddy shawn is contemplating selling his NB set as of yesterday lol
#214
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
They rub plastic in the front but the rear is good. It's not as bad in person as in the photo, actually looks mean as F&$K, just right.
You wouldn't be the first person who's seen the shot and wanted to go with NC vents. I just think they really flow well with the NB, more than the very straight edge NB louvres. Maybe Singular will come up with a "prettier" design one day, but I'm sure they all work. My local buddy shawn is contemplating selling his NB set as of yesterday lol
You wouldn't be the first person who's seen the shot and wanted to go with NC vents. I just think they really flow well with the NB, more than the very straight edge NB louvres. Maybe Singular will come up with a "prettier" design one day, but I'm sure they all work. My local buddy shawn is contemplating selling his NB set as of yesterday lol
That MSM turbo setup and all the heat it produced is what did me in to begin with. I despise Miata engine temps with a passion hahaha
#215
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Hey, get creative, but depending on where you place your holes, you may see no heat exiting at speed if there is pressure or downforce over the area. Also, my louvres are for extracting heat from the radiator, not the turbo. It just so happens that my turbo setup puts my snail close to my one vent, but just barely. These come with a vinyl stencil and have very specific placement.
Here's a look trying to get as best a view as I can. Yes, radiator fan is massive, and I might actually gain some airflow by moving to a smaller fan but I'll see how my temps are on the track as is. You can see the BOV that's built onto the EFR turbo in the bottom right corner, and the compressor housing ends up meeting the center housing right where the louvre ends.
![](https://www.miataturbo.net/attachments/media-53/164988-my-msm-finished-80-51bec98a_4392_40c8_b114_e58fd0257418_zps1vhgyk0c_452ce24ca8c5250fbdca0e08c8ec07b36c34ba24.jpg?dateline=1457619317)
Also as a side effect, the turbo is a lot louder, I mean a LOT. Sounds of boost are glorious, but I was kind of getting on it last night next to a concrete wall, and when I let off the pedal, the BOV and it's deflection against the wall scared the **** out of me. I can also hear my valvetrain/pistons a bit more when the car is still cold, and can hear when it quiets down (warms up).
Here's a look trying to get as best a view as I can. Yes, radiator fan is massive, and I might actually gain some airflow by moving to a smaller fan but I'll see how my temps are on the track as is. You can see the BOV that's built onto the EFR turbo in the bottom right corner, and the compressor housing ends up meeting the center housing right where the louvre ends.
![](https://www.miataturbo.net/attachments/media-53/164988-my-msm-finished-80-51bec98a_4392_40c8_b114_e58fd0257418_zps1vhgyk0c_452ce24ca8c5250fbdca0e08c8ec07b36c34ba24.jpg?dateline=1457619317)
Also as a side effect, the turbo is a lot louder, I mean a LOT. Sounds of boost are glorious, but I was kind of getting on it last night next to a concrete wall, and when I let off the pedal, the BOV and it's deflection against the wall scared the **** out of me. I can also hear my valvetrain/pistons a bit more when the car is still cold, and can hear when it quiets down (warms up).
#217
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
That's pretty ingenious to keep the cooling focused at the parts that were designed to do so. My reasoning for the turbo was yo hopefully make the radiator and intercooler not have to be as needed, but all options are worth exploring. And yea, I thought of the air pockets that might move over the holes and humored the idea of cutting air passages into the front bumper.
My intention is still to have vents and/or louvres to have useful heat extraction and downforce placed on the car. My ultimate goal aside from the power is to have people help me use air to my advantage, both for cooling and for grip.
My intention is still to have vents and/or louvres to have useful heat extraction and downforce placed on the car. My ultimate goal aside from the power is to have people help me use air to my advantage, both for cooling and for grip.
#218
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
![](https://www.miataturbo.net/attachments/media-53/165066-my-msm-finished-80-a3860c0b_ee3b_4547_b7be_045edcbb3522_zpsxi3nq0o4_0e82af24d770779ecf6b352183b3f29d7b58acbc.jpg?dateline=1457715342)
Found some light rubbing on something non-plastic in the rear, since I'm already rolled and lightly pulled it's not cutting the tire, but I did see a long scuff. Depending on what it's rubbing on (fender lip or inside of wheel well), the only options I may have are to pull a little more or add a little more camber. I'll try upping the damping a bit more, currently on 12f and 10r clicks on the XIDAs. The rub really happens when I take turns that have dips in them. I've got more testing to do, but these guys definitely fit tight haha. Camber currently at -2.5f and -2r.