Fun at eagles canyon raceway with hustler
#21
Tour de Franzia
iTrader: (6)
Join Date: Jun 2006
Location: Republic of Dallas
Posts: 29,085
Total Cats: 375
Seriously, threshold braking to the turn-in at 130mph sucks, and I do not like it.
#22
Elite Member
Thread Starter
iTrader: (7)
Join Date: May 2007
Location: Dallas, Tx
Posts: 3,006
Total Cats: 103
car feels grate even running a winter alignment, +.04 front and +.06 rear more camber then i do in track session
wish my adaptronic would work so i could almost match trey's power level
#23
Tour de Franzia
iTrader: (6)
Join Date: Jun 2006
Location: Republic of Dallas
Posts: 29,085
Total Cats: 375
2nd day out there (7th high speed session out there), track is just easy or i'm getting better at reading them. will say my braking zones do need work. i brake to early and ride the brakes to long but i do that at every track.
car feels grate even running a winter alignment, +.04 front and +.06 rear more camber then i do in track session
wish my adaptronic would work so i could almost match trey's power level
car feels grate even running a winter alignment, +.04 front and +.06 rear more camber then i do in track session
wish my adaptronic would work so i could almost match trey's power level
edit: Then again, how many properly tuned supercharged Miatas are running around? None.
I started looking at the tach and rather that shifting all the time, letting the tach drop to 3500rpm and still yank out of corners. That absurdflow get is the **** and gets tons of bitches.
#25
My suspension is a heinous set of 6" wide 99 wheels with 205's, Tein Flex with 10/8 springs, big front sway, RB rear sway, and door bars. Since adding the door bars the car attempts to kill me on entry and exit. Next time I go to the track I'm putting on the stock bar, and preparing to take it off. I have a lot of work to do.
Using the fatcat calculator your car is pretty tail happy! Lets see thats 558.8 and 447.04. Trey try the RB tubular with no rear bar or the 27mm spec miata front bar with no rear bar. The 27mm eibach bar should tone it down the most. You might want to add some 12k (670) front springs too. If you get the springs than go with the RB tubular bar. Also, I wonder if at your power level you weren't over powering those 205's and they were getting greesy, what tire are you running? Maybe its time for some 8" or 9" 6UL's and some 225's?
Last edited by jacob300zx; 12-14-2009 at 06:45 PM.
#31
Elite Member
Thread Starter
iTrader: (7)
Join Date: May 2007
Location: Dallas, Tx
Posts: 3,006
Total Cats: 103
i thought about that but trey wouldn't push it hard enough to spin
#32
Tour de Franzia
iTrader: (6)
Join Date: Jun 2006
Location: Republic of Dallas
Posts: 29,085
Total Cats: 375
The place where you tell me to not brake so much...well, that's the 2nd turn on the out-lap and I'd like to get some heat in the brakes and tires. You probably shouldn't be up my *** on the outlap.
#34
Tour de Franzia
iTrader: (6)
Join Date: Jun 2006
Location: Republic of Dallas
Posts: 29,085
Total Cats: 375
I want more seat time out there. I was just starting to cut down the braking points and put some pressure through the pedal. I need to get a cam in my car. I think I'm totally removing the rear sway after looking at the FCM calculator earlier today. I'm going to burn-up those skinnies to learn the braking points at ECR, then slap on the fatties after I've paid penance.
Thread
Thread Starter
Forum
Replies
Last Post
StratoBlue1109
Miata parts for sale/trade
21
09-30-2018 01:09 PM
elesjuan
Build Threads
7
11-03-2015 01:51 PM