Chiburbian

iTrader: (1)

I have somewhat of an emergency. Is there anyone that has a spare 01-04 ignition coil I can borrow to troubleshoot with? I plan on going to LS2 coils at some point and so I don't want to spend $130 at the dealer (or $100 at autozone etc) just to test. If I am only going to run stock coils for the remainder of this year I would prefer to buy a pair of the el'cheapo's (about $50ea) from rockauto.com, but that wouldn't get me to the dyno day after shipping time.

If I don't hear from anybody by noon I am just going to buy one at the dealer and keep it as a spare if it turns out not to be the problem...

lordrigamus

iTrader: (14)

Ill bring some munchies. As well as a few parts. Some Magnecore wires, an old *** HKS SSQ BOV, some used Wisecos for a 1.6 and whatever else I can find in the dungeon.

psreynol

sweet! that will be perfect. I can run the car and hang out for a few hours then move on. ill come a bit early so we can get set up. thanks

2manyhobyz

iTrader: (4)

Are they the same as a 00 coil? I have that lying around.

Mazduh

So I managed to accidentally brake the hdd in my tuning laptop. YAAAY!

So I'm totally going to be tuning on my drive tot he shop. lol

dieselmiata

iTrader: (3)

I hope it's not a bad omen that everyone's breaking **** getting ready for this.

Home13oy75

Planning on swinging by to watch and meet people. Just picked up my miata a few months ago so it's still bone stock.

stick

the breaking is normal. it is a test to see who is ready and determined to run.

Chiburbian

iTrader: (1)

01-05 coil is different from 99-00. Doesn't matter either way because I was able to borrow a fresh set of coils and that didn't solve my problem. I am going to try and borrow a fuel pressure tester tonight and also replace my fuel filter. If that doesn't work I am out not going to be able to run on the dyno. It's a shame becaust up until about two weeks ago things have really started to come together.

dieselmiata

iTrader: (3)

Inputs wanted:

Currently I'm running a 12psi wastegate actuator, but my clutch slips a bit sometimes when pushing it. Should I put my 6 psi actuator on to prevent any potential slips on the dyno?

This winter i'm planning on putting a bigger clutch and doing an engine rebuild so I'm thinking the 6psi actuator will give me a good baseline and (when/if) we do this again after the winter it will be nice to see the before/after.

It's very difficult to voluntarily turn down the boost.

Splitime

iTrader: (24)

Add the Fiat to the list... i'll be the low oddball just for kicks.

I'll have a trunk of stuff to sell... buy stuff to fund me buying other stuff...

How are time windows on dyno going to work btw? Can't do entire day.. have a 2wk old at home who's time is a bit more important to me...

triple88a

iTrader: (2)

Maaan toda is beautiful, sure hope its the same way tomorrow.

flying_solo

iTrader: (5)

I spent $15 in food on you losers on brats and buns. You better be hungry! I too hope tomorrow is like today, it is gorgeous out.

Slider

I'll be dropping by so I can hear some choo choo sounds

triple88a

iTrader: (2)

Someone bring a cam with more than 240by180 pixels?

Slider

Damn

lordrigamus

iTrader: (14)

Since the brats, buns and pop is covered, ill bring some side dishes instead. Should be a good time.

Chiburbian

iTrader: (1)

I will be getting up at 5am to replace my fuel filter and hopefully fix my fuel starvation problem. If I can solve everything by noon I will drive it out there wither or not I feel comfortable making a pull.

Otherwise I will drive my winter beater out there and just hang out.

Aricjm15

Crap I should have put my name on the list.

stick

its ok to show there still will be a good chance for everyone to get on the dyno with or without your name on the list. Not everyone will show up at the same time and some cars will take longer than others. Also mondo doesnt really care if there is a few more. I just want everyone to have enough time and there to be enough people as well. We seem to have accomplished the second and we shouldnt have a problem with the first concern either.

So everyone is welcome and we will just sort out the details when you get there.