Yet Another Gun Thread
#1863
Elite Member
iTrader: (37)
Join Date: Apr 2010
Location: Very NorCal
Posts: 10,448
Total Cats: 1,900
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Avoid Ceiner kits.
Look for a Marvel Unit 2 (regular 1911 sized slide) or Marvel Unit 1 (long slide with target barrel and sights). Both are more accurate than you're ever be, will run reliably with quality .22 ammo, and are backed by a solid company with good customer service.
Look for a Marvel Unit 2 (regular 1911 sized slide) or Marvel Unit 1 (long slide with target barrel and sights). Both are more accurate than you're ever be, will run reliably with quality .22 ammo, and are backed by a solid company with good customer service.
On a related not, someone offered to trade me an honest to god Colt Ace for my Ruger GP100 years ago. Had I only known...
2 3/4" I'd imagine? Does it have to be new/factory, or just used/serviceable? Gunsmith friend has a pile of stuff, I'll see if he has what your looking for. Last time I needed an 1100 barrel, he just pulled it out of the closet and gave it to me.
#1864
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
In short, it's a cool piece of engineering and history...but not what I'd choose if I was just wanting a way to use .22 ammo in my 1911.
#1868
Elite Member
Thread Starter
iTrader: (11)
Join Date: Jun 2007
Location: Overland Park, Kansas
Posts: 5,360
Total Cats: 43
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Put 250 rounds through my 9mm LoneWolf conversion barrel in a G22 today. Got some great lulz and strange looks from people with the flash hider and my 'backpack carbine' sporting 33 round magazines. ![big grin](https://www.miataturbo.net/images/smilies/biggrin.gif)
Conversion barrel ran like a swiss watch. Only hiccup was the last round of each magazine would stovepipe, but I suspect that's because of either my light loads (115gr lead bullet w/3 grains of Red Dot) and might be a little because of the magazine. Noticed when you get up to the last few rounds the spring is pretty soft so the follower doesn't hit slide release in time for it to lock open.
Far as my Sub2000 goes, I wish it had a last round hold because it does the same thing.... Only problem is the bolt is so fuggin heavy it smashes my empty casing.
![big grin](https://www.miataturbo.net/images/smilies/biggrin.gif)
Conversion barrel ran like a swiss watch. Only hiccup was the last round of each magazine would stovepipe, but I suspect that's because of either my light loads (115gr lead bullet w/3 grains of Red Dot) and might be a little because of the magazine. Noticed when you get up to the last few rounds the spring is pretty soft so the follower doesn't hit slide release in time for it to lock open.
Far as my Sub2000 goes, I wish it had a last round hold because it does the same thing.... Only problem is the bolt is so fuggin heavy it smashes my empty casing.
#1872
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Traded my CZ vz52, two mags and 100 rounds ammo (had $116 total in the gun/ammo) for a Ruger 10/22 today. Came with the stock 10 round mag, two 30 round banana mags (promags with metal lips), and 1000 rounds of ammo. I've been thinking about putting a new stock and bull barrel on mine but didn't want to take the gun down for long (I shoot ~1000 rounds a week though it) and didn't want to mess up my gun that looked and shot so nice already. This will give me some parts to play with so I can build something special.
Missed out on a fantastic deal yesterday on a 5.5 pound Keltec SU16 .223 with a broken receiver. The guy only wanted $200 for it (lifetime warranty from Keltec) but I contacted him about 30 minutes too late. Would have been and interesting rifle to play with for $400 off normal price.
Missed out on a fantastic deal yesterday on a 5.5 pound Keltec SU16 .223 with a broken receiver. The guy only wanted $200 for it (lifetime warranty from Keltec) but I contacted him about 30 minutes too late. Would have been and interesting rifle to play with for $400 off normal price.
#1873
Elite Member
Thread Starter
iTrader: (11)
Join Date: Jun 2007
Location: Overland Park, Kansas
Posts: 5,360
Total Cats: 43
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
FU@K!!! That SU16 would've been ****.. I won't ever own one though, they cost way too much for what it is..
Sounds like you got a great deal on that Ruger! I've been wanting a 10/22 for a while, haven't found a deal on one yet.
Don't know if I've posted it or not, (don't really care right now..) but my absolute favorite gun cost me $40 in trade:
![](https://lh3.googleusercontent.com/-DRTxu4CVkEo/Tz_x4JZHKLI/AAAAAAAADbU/tQUaCM6Feyk/s800/IMG_7904.jpg)
1970s Marlin Glenfield Model 60 that came with the "TV screen" Scope. Swapped out that scope for a cheap burris 3.5-10x40 mildot I had laying around. I can't believe how accurate this old *** rifle is considering it's age and care! I've yet to clean any part of it and neither did the previous owner. It got to the point last week where it wouldn't go into battery after chambering a new round, so I squirted a little gun butter on the bolt and it's business as usual again!! I've put almost 10k rounds through it in the last year, runs like a swiss car...
Effing LOVE .22lrs!!
Sounds like you got a great deal on that Ruger! I've been wanting a 10/22 for a while, haven't found a deal on one yet.
Don't know if I've posted it or not, (don't really care right now..) but my absolute favorite gun cost me $40 in trade:
![](https://lh3.googleusercontent.com/-DRTxu4CVkEo/Tz_x4JZHKLI/AAAAAAAADbU/tQUaCM6Feyk/s800/IMG_7904.jpg)
1970s Marlin Glenfield Model 60 that came with the "TV screen" Scope. Swapped out that scope for a cheap burris 3.5-10x40 mildot I had laying around. I can't believe how accurate this old *** rifle is considering it's age and care! I've yet to clean any part of it and neither did the previous owner. It got to the point last week where it wouldn't go into battery after chambering a new round, so I squirted a little gun butter on the bolt and it's business as usual again!! I've put almost 10k rounds through it in the last year, runs like a swiss car...
![big grin](https://www.miataturbo.net/images/smilies/biggrin.gif)
#1874
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Not sure how long the listing will stay up:
http://www.armslist.com/posts/345034...6-needs-repair
That will buff right out:
http://www.armslist.com/posts/345034...6-needs-repair
That will buff right out:
![](https://www.miataturbo.net/attachments/insert-bs-here-4/38057-yet-another-gun-thread-634680522714607768vayv3a5j.jpg?dateline=1332738406)
#1878
Elite Member
iTrader: (37)
Join Date: Apr 2010
Location: Very NorCal
Posts: 10,448
Total Cats: 1,900
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
I grew up shooting that exact same gun! It belonged to my grandfather and he's the one that taught me to shoot, rest of the family is not exactly gun-friendly. It DIAFF when I lost my place in '08, that's probably the only thing I regret not saving from the house.
#1879
Elite Member
Thread Starter
iTrader: (11)
Join Date: Jun 2007
Location: Overland Park, Kansas
Posts: 5,360
Total Cats: 43
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
That's sad. I have no historical attachment to mine, just love the damn thing to death and really surprised how accurate it is. Even with no historical or emotional attachment I'd still hate to lose that one..
#1880
Elite Member
Thread Starter
iTrader: (11)
Join Date: Jun 2007
Location: Overland Park, Kansas
Posts: 5,360
Total Cats: 43
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Midwayusa.com has hogue Handall's on sale for like $5.99 each:
Picked up a Jr for my PF9 which makes it a lot more fun to shoot:
![](https://lh4.googleusercontent.com/-tcAa1GXutxw/T3U45T5h5HI/AAAAAAAAHc8/hWtfpj4Sl8M/s800/IMG_8109%255B1%255D.jpg)
The grip on my Sub 2000 is slightly less than perfect feeling, this helped a LOT. Gimme a +1 for the ISSUED USMC Sling which saw action in Afghanistan on my best friends M4 USMC Issued rifle that he gifted me for my Birthday:
![](https://lh6.googleusercontent.com/-1u5Ep6Oap2s/T3U45FzsjJI/AAAAAAAAHc4/NT_i8CXW8Sc/s800/IMG_8113%255B1%255D.jpg)
Can't wait to get some upgrades for this rifle.. Looking at a Red Lion forend with some sights other than factory. Admittedly, the factory sights aren't really that terrible.
Also discovered that Black Dog Machine had a Gen III AR-15 magazine for .22lr conversions:
![](https://lh3.googleusercontent.com/-j6aIs7_ieGs/T3U40Ch9MSI/AAAAAAAAHcw/t397rtHvkUs/s800/IMG_8116%255B1%255D.jpg)
![](https://lh4.googleusercontent.com/-DEpWy5VzWgs/T3U4_YttoLI/AAAAAAAAHdQ/1x_JxeogbZc/s800/IMG_8119%255B1%255D.jpg)
Has steel feedlips.. Too bad it doesn't fit any of my Three AR magazine wells. BDM failed on this one. :(
Since I don't subscribe to the 'myth' of CCW with handloads, I load up my own. Start with some WCC or Speer nickle casings, add a 125+ grain Sierra JHP, and some powder. The two on the left were 125gr Sierra JHP's with 5.3gr (measured on digital scale) of Alliant Unique powder which is .3gr over the "maximum" according to my load book. Load claims 5.0gr in a 4" bbl gives 1078fps @ 30700psi pressure. Judging by the condition of the primers, I might back those loads down by a full grain of powder... On the right is a 115gr FMJ I loaded with 3.0gr of Unique Red Dot fired from my Sub2000.
Picked up a Jr for my PF9 which makes it a lot more fun to shoot:
![](https://lh4.googleusercontent.com/-tcAa1GXutxw/T3U45T5h5HI/AAAAAAAAHc8/hWtfpj4Sl8M/s800/IMG_8109%255B1%255D.jpg)
The grip on my Sub 2000 is slightly less than perfect feeling, this helped a LOT. Gimme a +1 for the ISSUED USMC Sling which saw action in Afghanistan on my best friends M4 USMC Issued rifle that he gifted me for my Birthday:
![](https://lh6.googleusercontent.com/-1u5Ep6Oap2s/T3U45FzsjJI/AAAAAAAAHc4/NT_i8CXW8Sc/s800/IMG_8113%255B1%255D.jpg)
Can't wait to get some upgrades for this rifle.. Looking at a Red Lion forend with some sights other than factory. Admittedly, the factory sights aren't really that terrible.
Also discovered that Black Dog Machine had a Gen III AR-15 magazine for .22lr conversions:
![](https://lh3.googleusercontent.com/-j6aIs7_ieGs/T3U40Ch9MSI/AAAAAAAAHcw/t397rtHvkUs/s800/IMG_8116%255B1%255D.jpg)
![](https://lh4.googleusercontent.com/-DEpWy5VzWgs/T3U4_YttoLI/AAAAAAAAHdQ/1x_JxeogbZc/s800/IMG_8119%255B1%255D.jpg)
Has steel feedlips.. Too bad it doesn't fit any of my Three AR magazine wells. BDM failed on this one. :(
Since I don't subscribe to the 'myth' of CCW with handloads, I load up my own. Start with some WCC or Speer nickle casings, add a 125+ grain Sierra JHP, and some powder. The two on the left were 125gr Sierra JHP's with 5.3gr (measured on digital scale) of Alliant Unique powder which is .3gr over the "maximum" according to my load book. Load claims 5.0gr in a 4" bbl gives 1078fps @ 30700psi pressure. Judging by the condition of the primers, I might back those loads down by a full grain of powder... On the right is a 115gr FMJ I loaded with 3.0gr of Unique Red Dot fired from my Sub2000.
![](https://lh3.googleusercontent.com/-gTxqmaNuDrU/T3U4-KMRuTI/AAAAAAAAHdI/_8LbW55rvxQ/s800/IMG_8121%255B1%255D.jpg)