Who here has sunk 10k+ into their Miata and isn't boosted yet?
#21
Tour de Franzia
![](/mt2011/images_td/ranks/supporter1.gif)
iTrader: (6)
Join Date: Jun 2006
Location: Republic of Dallas
Posts: 29,085
Total Cats: 375
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
As hustler said, it is too expensive to track something heavier then a Miata. R-comps are cheap and plentiful used, or even new the 225/45 NT-01's are not horribly expensive.
What else could I get for 20k that does the same ****? An S2K, maaaybe. Even then, slower, but probably less bullshit, but who can keep a performance car stock? S2K mods are $$$$.
What else could I get for 20k that does the same ****? An S2K, maaaybe. Even then, slower, but probably less bullshit, but who can keep a performance car stock? S2K mods are $$$$.
At first I just wanted a 9.5:1 99 motor...then God spoke to me at the track one day. It (she) said, "Hustler, you will build a miata and **** on the chest of viper and lambo drivers because they are ------s, and it makes their penii shivel up inside their bodies when a miata *****-tomps their souls. If you build it, girls thighs will stick together."
basically, a decree was made by god, and I can't ignore that. Its my destiny.
#22
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Paid 5900 cash for the NB back in August 06.
250 for a coil pack week after I purchased car
220 for timing belt stuff
200 on brakes
1100 on MS stuff and LC1
1600 on nitrous hardware and refills.
1100 on hardtop
400 on wheels
90 for the intercooler
140 for 550cc injectors
50 for pierburb fuel pump
120 for new stock fuel pump
110 for Mallory FPR
100 for fuel lines and fittings
210 for mandrel bends
200 for mufflers and glass packs
100 on welding supplies
55 tubing
80 EDIS ignition system
90 for SC crank pulley
100 for oil lines and fittings
40 for sandwhich plate
400 on tooling for the build
50 on hardware
110 for the SC's
30 for master and slave rebuild kits
200 clutch
7,145 in parts
13,045 including the cost of the car
And I'm probably forgetting some stuff and I'm by no means done purchasing stuff.
250 for a coil pack week after I purchased car
220 for timing belt stuff
200 on brakes
1100 on MS stuff and LC1
1600 on nitrous hardware and refills.
1100 on hardtop
400 on wheels
90 for the intercooler
140 for 550cc injectors
50 for pierburb fuel pump
120 for new stock fuel pump
110 for Mallory FPR
100 for fuel lines and fittings
210 for mandrel bends
200 for mufflers and glass packs
100 on welding supplies
55 tubing
80 EDIS ignition system
90 for SC crank pulley
100 for oil lines and fittings
40 for sandwhich plate
400 on tooling for the build
50 on hardware
110 for the SC's
30 for master and slave rebuild kits
200 clutch
7,145 in parts
13,045 including the cost of the car
And I'm probably forgetting some stuff and I'm by no means done purchasing stuff.
#24
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
I bought my 94 for $6500, the PO bought the car for $7, and they put $11K into it in only 15K miles.
I thought .30 on the Dollar for a FI miata was a decent deal (not a great deal but fair). And that included a BLACK hardtop...
The next miata (or possible other car) I would think of putting $10K into would be an EV conversion...
http://www.jstraubel.com/EVpusher/EVpusher2.htm
I thought .30 on the Dollar for a FI miata was a decent deal (not a great deal but fair). And that included a BLACK hardtop...
The next miata (or possible other car) I would think of putting $10K into would be an EV conversion...
http://www.jstraubel.com/EVpusher/EVpusher2.htm
#25
Elite Member
iTrader: (11)
Join Date: Jun 2007
Location: Overland Park, Kansas
Posts: 5,360
Total Cats: 43
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
I bought my 94 for $6500, the PO bought the car for $7, and they put $11K into it in only 15K miles.
I thought .30 on the Dollar for a FI miata was a decent deal (not a great deal but fair). And that included a BLACK hardtop...
The next miata (or possible other car) I would think of putting $10K into would be an EV conversion...
http://www.jstraubel.com/EVpusher/EVpusher2.htm
I thought .30 on the Dollar for a FI miata was a decent deal (not a great deal but fair). And that included a BLACK hardtop...
The next miata (or possible other car) I would think of putting $10K into would be an EV conversion...
http://www.jstraubel.com/EVpusher/EVpusher2.htm
![](http://smiliesftw.com/x/augentreher.gif)
![](http://smiliesftw.com/x/augentreher.gif)
![](http://smiliesftw.com/x/augentreher.gif)
![](http://smiliesftw.com/x/augentreher.gif)
Dude better get some safety chains on that "trailer.."
#27
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
I bought my 94 for $6500, the PO bought the car for $7, and they put $11K into it in only 15K miles.
I thought .30 on the Dollar for a FI miata was a decent deal (not a great deal but fair). And that included a BLACK hardtop...
The next miata (or possible other car) I would think of putting $10K into would be an EV conversion...
http://www.jstraubel.com/EVpusher/EVpusher2.htm
I thought .30 on the Dollar for a FI miata was a decent deal (not a great deal but fair). And that included a BLACK hardtop...
The next miata (or possible other car) I would think of putting $10K into would be an EV conversion...
http://www.jstraubel.com/EVpusher/EVpusher2.htm
#28
Former Vendor
![](/mt2011/images_td/ranks/supporter1.gif)
iTrader: (31)
Join Date: Nov 2006
Location: Sunnyvale, CA
Posts: 15,442
Total Cats: 2,103
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
I had $8k in mods, $12k or so including car, before I was boosted. $4k into the interior, $2k in suspension, $1k in wheels and tires, $1k in clutch/radiator/brakes. Something like $17-18k in now, and not even close to done. I'll probably be into it $25-30k before I am finished. :/
#32
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
I'm about $25,000 into my car.
New carpet, top, leather seats, polished stainless rollbar, stereo and paint.
Koni's, sways, frame rails, braces & end links
2 sets of wheels 15x7 and 15x8 and tires TS-1 (need new ones) and RS-2
BEGi S3, Link , Dual Feed FR, gauges, Wideband etc
3" dual exhaust (Enthuzia custom)
Plus a lot of other crap.
New carpet, top, leather seats, polished stainless rollbar, stereo and paint.
Koni's, sways, frame rails, braces & end links
2 sets of wheels 15x7 and 15x8 and tires TS-1 (need new ones) and RS-2
BEGi S3, Link , Dual Feed FR, gauges, Wideband etc
3" dual exhaust (Enthuzia custom)
Plus a lot of other crap.
#34
Senior Member
Thread Starter
iTrader: (4)
Join Date: May 2007
Location: Ontario
Posts: 789
Total Cats: 1
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
It's easy to start justifying that last 10-15k, I never want to go there, as then you realize you would have been better off starting with a better platform. (IMO)
You just get to a performance level where the the money sunk in is no longer offering a good return of your money.
You just get to a performance level where the the money sunk in is no longer offering a good return of your money.
#35
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
I did think about that, but like the Miata for what it is 'small classic type sports car'
I did think about cars like the S2000, Z3, Z4 and M Roadster for about the same money ($ 10,000 for the Miata plus options) but I like the idea of a small 'cute girls car' that can blow the doors off a new 'HEMI' or a 'stang.
Also unlike a lot of people here I plan on keeping the Miata for at least 10 to 15 more years.
I did think about cars like the S2000, Z3, Z4 and M Roadster for about the same money ($ 10,000 for the Miata plus options) but I like the idea of a small 'cute girls car' that can blow the doors off a new 'HEMI' or a 'stang.
Also unlike a lot of people here I plan on keeping the Miata for at least 10 to 15 more years.
#36
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
I did think about cars like the S2000, Z3, Z4 and M Roadster for about the same money ($ 10,000 for the Miata plus options) but I like the idea of a small 'cute girls car' that can blow the doors off a new 'HEMI' or a 'stang.
Also unlike a lot of people here I plan on keeping the Miata for at least 10 to 15 more years.
Also unlike a lot of people here I plan on keeping the Miata for at least 10 to 15 more years.
I plan to keep my car for a very long time,there's no point in selling it when you have a certain amount of money invested into it,unless something unexpected were to come up.
#37
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
3200$ For my Miata
700$ For a New Top
3200$ Begi S + MSPNP + IC + GT2560+ LC1
800$ Wheels + Tires
1200$ Suspension
500$ Roll Bar
100$ Shift ****
250$ Steering Wheel + Hub
400$ Clutch
400$ Radiator
400$ Timing Belt
= 11,150$
1150$ over budget, but I know its more than that considering I have had plenty of other related expenses.
700$ For a New Top
3200$ Begi S + MSPNP + IC + GT2560+ LC1
800$ Wheels + Tires
1200$ Suspension
500$ Roll Bar
100$ Shift ****
250$ Steering Wheel + Hub
400$ Clutch
400$ Radiator
400$ Timing Belt
= 11,150$
1150$ over budget, but I know its more than that considering I have had plenty of other related expenses.